80" Profile ARF's

80" Profile ARF's (Full Version)

All Forums >> [RC Airplanes] >> Profile and Fun Flying Planes >> OMP - Ohio Model Products Support Forum

Message

Hangar Pilot -> 80" Profile ARF's (6/14/2007 3:19:48 AM)
Will we see the 80" Extra, Edge 540 or Yak ARF's again? If so when? Thanks! Joe

CopperheadAV -> RE: 80" Profile ARF's (6/14/2007 4:11:35 AM)
Hanger pilot, We never produced 80" Extra, Yak or yak in an ARF, only in a kit. We recently produced the Edge in an ARF and sales exceed our expectations, we are currently doing another run. The Yak will be out shortly after!! Stay tuned for more innovative designs! You will shortly see an 80" something [:D] [:D] [:D] Cheers,

Walt and Sage -> RE: 80" Profile ARF's (6/14/2007 2:24:39 PM)
Gentlemen, Attached is a photo of my OMP 80 inch ARF YAK... I also have the OMP 80 inch Edge ARF profile... Am I missing something or living in the Twilight Zone ??? [:)]

CopperheadAV -> RE: 80" Profile ARF's (6/14/2007 2:43:58 PM)
Hanger Pilot Walt My apologies, I answered the post on the fly. We currently do not produce them in the ARF, only a kit. There were some shipping concerns. I will "Before you speak, listen. Before you write, think" next time! Cheers,

Walt and Sage -> RE: 80" Profile ARF's (6/14/2007 2:57:18 PM)
That is OK ... That is your ONE mistake for the year.. I have made 14 so far.... [;)] Walt...

CopperheadAV -> RE: 80" Profile ARF's (6/14/2007 2:58:35 PM)
[:D][:D][:D]

AFSalmon -> RE: 80" Profile ARF's (6/14/2007 10:35:34 PM)
Well how many folks want the 80" Edge ARF back? I know I could use one after my last....uh.......engine flameout.[:(]

Hangar Pilot -> RE: 80" Profile ARF's (6/14/2007 11:38:17 PM)
I know that I would like to have one or two of the Yaks or the Edge 540.

PlanePlanter -> RE: 80" Profile ARF's (6/15/2007 1:51:00 AM)
quote: ORIGINAL: AFSalmon Well how many folks want the 80" Edge ARF back? I know I could use one after my last....uh.......engine flameout.[:(] It's not THAT bad!!!! You could fix it.......(with a new ARF[X(] [:D])

Walt and Sage -> RE: 80" Profile ARF's (6/15/2007 2:59:52 PM)
quote: ORIGINAL: Hangar Pilot I know that I would like to have one or two of the Yaks or the Edge 540. DITO on THAT...[;)]

PlanePlanter -> RE: 80" Profile ARF's (6/15/2007 3:50:34 PM)
Lets see... HP=2 W&S=2 Mike=1 Me=1 Thats six.....keep'm coming guys....maybe we can talk them into it[;)]

kawasaki99 -> RE: 80" Profile ARF's (6/15/2007 4:04:55 PM)
I would take 1 of each! that makes 8.

IowaSilvia -> RE: 80" Profile ARF's (6/17/2007 2:01:41 AM)
I'm going to be the proud owner of this bad boy!!!!!

Berwyn Bill -> RE: 80" Profile ARF's (6/17/2007 4:35:54 AM)
I'd love one, either Yak or Edge!

closetguy -> RE: 80" Profile ARF's (6/17/2007 1:43:35 PM)
i don't think you need a list of names to get the 80" ARF'S back on the list they always seem to move pretty fast when you EVER get them in STOCK,and i will take one with a 45cc gasser now lets get the ball a rolling![:D] ENJOY!

modestmagi -> RE: 80" Profile ARF's (6/20/2007 3:31:49 PM)
Count me in. I'd prefer the yak, but will happily take either.

Harleyflyer -> RE: 80" Profile ARF's (6/20/2007 6:48:55 PM)
Count me in. I will take an 80 inch Edge or Yak. [8D]

theo63 -> RE: 80" Profile ARF's (6/21/2007 4:35:52 PM)
count me in for the edge as well

BAS -> RE: 80" Profile ARF's (6/24/2007 3:39:22 PM)
I will take another edge or Yak i ran ys 140 on mine just plane wore it out.

krazo -> RE: 80" Profile ARF's (6/25/2007 12:11:36 AM)
There should a pretty high demand for either the 80" Edge or the 79" Yak. There are a few changes that would help. The ARF covering needs to be stock Ultracote, and beef up the structure just a little to handle a BME-50 or a DA-50.

Harleyflyer -> RE: 80" Profile ARF's (6/25/2007 2:34:02 AM)
What krazo said.....[:D]

mrbigg -> RE: 80" Profile ARF's (6/27/2007 12:58:50 AM)
I'll take one for sure. Do I get a discount if I buy one of each?[sm=lol.gif]

AFSalmon -> RE: 80" Profile ARF's (6/28/2007 3:07:51 AM)
The 80" profiles are designed for glow engines around the size of the OS 160. Yes many have put gas engines on them but no way would I recommend a DA 50 or similar. That's what the Hybrid is for. Beefing up the structure for a gasser means adding more weight, which would negatively affect the masses who use the intended engine size and type.

IowaSilvia -> RE: 80" Profile ARF's (6/28/2007 4:37:41 PM)
Here's a pic of mine from last weekend's P R O B R O MVVS 35cc on it.

Razorback58 -> RE: 80" Profile ARF's (6/28/2007 6:47:35 PM)
quote: ORIGINAL: IowaSilvia Here's a pic of mine from last weekend's P R O B R O MVVS 35cc on it. Looking good Brent! Looks like you're enjoying it.

Page: [1] 2 3 4 next > >>

SITE MAP! : : FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.

0.375