My Trainer Construction (Full Version)

All Forums >> [RC Airplanes] >> Kit Building



Message

facu_dejota -> My Trainer Construction (6/16/2007 10:53:53 PM)

Hello, im from Buenos Aires, Argentina.
That my first rc trainer, but also i have a smallest p-51 and a riser plane.

I construct this model with the contrcuction plans only.


I hope to see all in the 25th World Championship
affectionate greatings from Argentina!

Facundo

(sorry for my english)



facu_dejota -> RE: My Trainer Construction (6/16/2007 10:59:29 PM)

bye



ChuckW -> RE: My Trainer Construction (6/17/2007 12:33:53 AM)

Nice work.



Mr. E -> RE: My Trainer Construction (6/17/2007 4:20:22 AM)

whats the name of the airplane id like a set of thoughs plans



flybug -> RE: My Trainer Construction (6/17/2007 12:29:44 PM)

Let us know of the maiden flight



AERORICH -> RE: My Trainer Construction (6/17/2007 9:10:04 PM)

Hi there: Thank you for sharing such a great job in building such a nice trainer. Be sure and capture some inflight photos for us to marvel at.


Rich S.



facu_dejota -> RE: My Trainer Construction (6/18/2007 5:10:41 PM)

thanks for yours replys!! [;)]

The airplane plans what i have are plotted. I dont have plans in cad or similar :(

The model name is "Pampa" and was disegned from one person from my aermodel club.

The trainer now has 10 flights aprox. I start to fly it with a friend (who have other models too) and now i'm learning to "take off and take land" (i dont now as it said) but i am flying single right now. I love this hobbie!!

Here i post one photo in flight.. i have others.. but are bad. this is the best [&:]

when i have better pics i will post it.


Facu



facu_dejota -> RE: My Trainer Construction (6/18/2007 5:14:03 PM)

it is seen too much far [:(]

here its in the club with my friend model



Gringo Flyer -> RE: My Trainer Construction (6/18/2007 5:26:42 PM)

Hola Facu. Donde estas volando? Soy norteamericano pero vivo en Formosa Argentina. Aca tenemos un aeroclub pero somos pocos. Igual disfrutamos del hobby!

Ahora estamos preparando todo para ir a Santa Fe en noviembre.

Avisáme si necesitás algo.



facu_dejota -> RE: My Trainer Construction (6/18/2007 10:20:53 PM)

Hola gringo? jaja

Estoy yendo al club Ciudadela (que se encuentra en palomar, Gran Buenos Aires)

Muero por ir para Santa Fe.. pero no tengo nada confirmado, ya que estudio ingenieria acá en Buenos Aires, y no se como voy a estar por noviembre.
Iba a ir con 2 amigos del club que están en esto hace rato. Pero hace poco les ofrecieron trabajar en el evento y ahora no se como voy a hacer!
Igualmente voy a hacer lo imposible por estar.

Que bueno que se esten preparando todos para santa fe.. va a ser increible!

Tenes idea de algún lugar donde parar durante los 10 dias?

Saludosss!



carrellh -> RE: My Trainer Construction (6/19/2007 6:25:49 PM)

You built a very nice plane.



flybug -> RE: My Trainer Construction (6/19/2007 7:28:13 PM)

For the rest of us Babel Fish Translation and some edit:

Gringo Flyer - Where are you flying? I am North American but I live in Formosa, Argentina . Here we have a flying club but we are just a few. Equal we enjoy the hobby! Now we are preparing everything to go to Santa Fe in November. Let me know if you need something.

Facu dejota - Hello Gringo? haha I am going to the Ciudadela club (that is in pigeon house, Great Buenos Aires) I die to go to Santa Fe.. but I do not have anything confirmed, since I study engineering in Buenos Aires, and don't know how I am going to be in favor of November. I was going to go with 2 friends of the club who have been in this for quite a while. But recently they were offered to work in the event and I dont know what I am going to do! Either way I am going to do the impossible thing to be there. That's good that you all are preparing for santa fe. it's going to be incredible! Do you have any idea of some place where to stay during the 10 days? Regards!

And now we no longer speak in tongues as good Paul advises: 1Corinthians 9, 11
So likewise ye, except ye utter by the tongue words easy to be understood, how shall it be known what is spoken? for ye shall speak into the air.
Therefore if I know not the meaning of the voice, I shall be unto him that speaketh a barbarian, and he that speaketh shall be a barbarian unto me.[8|]



Gringo Flyer -> RE: My Trainer Construction (6/19/2007 10:01:58 PM)


quote:

ORIGINAL: flybug
Therefore if I know not the meaning of the voice, I shall be unto him that speaketh a barbarian, and he that speaketh shall be a barbarian unto me.[8|]


So who you callin' a barbarian me or you?[:-]



chashint -> RE: My Trainer Construction (6/20/2007 6:09:52 AM)

Very nice work, and you have no reason to apologize for your English, you do very well with it.



somegeek -> RE: My Trainer Construction (6/20/2007 7:26:34 AM)

Nice work on the kit build and maiden flight as well as the solo!

Nice to be able to go fly when you want.

somegeek



gutmark -> RE: My Trainer Construction (6/20/2007 2:51:50 PM)

Your workbench isn't messy/cluttered enough. Spread some balsa shavings around, maybe a little balsa dust here and there. [;)]

Good looking airplane.



facu_dejota -> RE: My Trainer Construction (6/29/2007 3:32:40 PM)

sorry for not respond.
I have some problems with my internet provider.

I not understood all of the finally coment of "flybug"

but sorry for write in spanish!




Gringo Flyer -> RE: My Trainer Construction (6/29/2007 4:29:39 PM)

He just translated what we said and then quoted a passage from the Bible. Talvez es dificil entender el pasaje porque seria como la traducion de la reina valera. Es decir, tiene un idioma muy elevado.

Nosotros vamos a Santa Fe por unos dias no mas. No puedo ir todo el tiempo. Recien compre un goro y remera de Team USA! Para el 7y8 de Julio vamos a estar en Villa Angela Chaco para el encuentro alla. No es un encuentro muy grande como ustedes tienen en Buenos Aires pero es un lindo evento y todo el club va.

Estrenaste el trainer?



facu_dejota -> RE: My Trainer Construction (6/18/2008 2:42:45 AM)

thats the plane flying!

http://www.youtube.com/watch?v=dxIjuyKOm6U
http://www.youtube.com/watch?v=RO6MTONTGkY



mikenlapaz -> RE: My Trainer Construction (6/20/2008 8:21:37 AM)

Thanks for sharing. You have a nice plane and work area.



Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
0.25