Tx Low voltage indicator

Tx Low voltage indicator (Full Version)

All Forums >> [Radios, Batteries, Clubhouse and more] >> RC Radios, Transmitters, Receivers, Servos, gyros >> Radio Manufacturer Direct Support >> Hitec/MultiPlex Radios- Ask Hitec Customer Service

Message

Krish -> Tx Low voltage indicator (3/4/2003 10:51:25 AM)
Hi Mike, In reading the manual for new Eclipse 7, I noticed "Tx will start beeping when battery voltage reaches 9.3V", I also have Futaba equipment and they indicate "Tx will start beeping at 8.5V". Why the much higher threshhold, is 7 using higher current? Must say I learned a lot from the manual. Thanks Krish

MikeMayberry -> Tx Low voltage indicator (3/6/2003 2:12:34 AM)
9.3V gives you plenty of time to land and taxy back safely. 8.5V is cutting it close. Mike.

Page: [1]

0.046875