Difference in Servo's (HS-81std & mg) (Full Version)

All Forums >> [RC Helicopters] >> Electric RC Helis

Message

---

fr3kazoid -> Difference in Servo's (HS-81std & mg) (3/7/2003 11:33:47 PM) Topic

---

fr3kazoid -> Difference in Servo's (HS-81std & mg) (3/8/2003 5:07:33 AM) HS-85MG servos are rated the same torque as standards, weigh half that of standards and are faster. Finally found some info!!

---

fr3kazoid -> Difference in Servo's (HS-81std & mg) (3/8/2003 6:22:08 AM) Talking to myself again... after some research on the official site, the mg is for metal gear and weighs more than the std servo's. They are probably just more durable. Nylon 0.58 oz. 16.6 g. Metal 0.67 oz. 19 g. I can see no other difference in performance.

---

Page: [1] 1

SITE MAP!   : :   FORUM RULES © 2001 - 2007 24-7 RC, LLC, all rights reserved.

0.1074219