Pin Switch  
View related threads: (in this forum | in all forums)

Tower Hobbies
Enter up to 4 keywords or Tower stock numbers
Logged in as Guest



Users viewing this topic: none
  Printable Version
       

All Forums >> Radios, Batteries, Clubhouse and more >> RC Radios, Transmitters, Receivers, Servos, gyros >> Radio Manufacturer Direct Support >> Smart-Fly (Quest Engineering) Support Forum >> Pin Switch
Page: [1]

Login
Message << Older Topic   Newer Topic >>
Pin Switch - 7/23/2007 5:03:15 PM   
juanes1969


 

Posts: 368
Joined: 5/10/2005
From: Comayaguela, , HONDURAS
Status: offline 		Robert:
I got the switch for the super regulator but I have some questions about the way it works.
I have two batteries connected to the regulator, do I need only one switch to power off the reg?
Can I NOT use the two charging jacks that come with it? only the switch to turn on and off?
The regulator only has one connector for the switch, right?

Thanks Robert,

John

_____________________________

Just fly it!!
       Post #: 1

RE: Pin Switch - 7/24/2007 1:55:46 AM   
rrritchey


 

Posts: 621
Joined: 9/29/2004
From: Phoenix, AZ, USA
Status: offline 		Hi John,
You only need one failsafe switch for both batteries. I don't understand why you cannot use the two charge leads. They plug into the SuperReg where it says charge next to each Deans connector. Please let me know if you need more explanation.


_____________________________

Robert Ritchey
Owner, Smart-Fly

(in reply to juanes1969)
       Post #: 2

RE: Pin Switch - 7/24/2007 3:02:17 PM   
juanes1969


 

Posts: 368
Joined: 5/10/2005
From: Comayaguela, , HONDURAS
Status: offline 		Robert:
The reason for me not using the charge leads is because the batteries I use (duralites) cannot be charged thru the same lead that plug to the reg. However, I was taking a closer look at the system and I think I could use the charge jacks with the charging leads in a separate way so I can check them and charge them without going thru the regulator.
I`ll try it out and see what happens.
John

_____________________________

Just fly it!!

(in reply to rrritchey)
       Post #: 3

RE: Pin Switch - 7/25/2007 3:08:07 PM   
rrritchey


 

Posts: 621
Joined: 9/29/2004
From: Phoenix, AZ, USA
Status: offline 		Hi John,
OK, I did not know you had Durlites. You should be able to use the charge jacks but not the charge leads. I am not sure if you can check your battery voltage through the Duralite charge leads? If not you might want to still use the charge leads off the regulator so you can check voltage and then just charge with your canopy off.


_____________________________

Robert Ritchey
Owner, Smart-Fly

(in reply to juanes1969)
       Post #: 4

Page:   [1]
All Forums >> Radios, Batteries, Clubhouse and more >> RC Radios, Transmitters, Receivers, Servos, gyros >> Radio Manufacturer Direct Support >> Smart-Fly (Quest Engineering) Support Forum >> Pin Switch
Page: [1]





Jump to:


Google 



Search | Marketplace | Event Calendar | Local Clubs | Magazine | Product Ratings | New Products | Discussion Forums

Photo Gallery | Member Video Posts | RCU Video Gallery | Instructor Search | Field|Track|Marina Search

Advertisers | Hobby Vendor Resources | Rate Manufacturers | Sign In/Sign Up

SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.

Charities we support that also need your help
Yorkie Rescue | Humane Society | ASPCA | Crohn's-Colitis America

Kaango.com Classifieds

0.344RCU1