Hitec working on any new 7+ Ch radios?? (Full Version)

All Forums >> [Radios, Batteries, Clubhouse and more] >> RC Radios, Transmitters, Receivers, Servos, gyros >> Radio Manufacturer Direct Support >> Hitec/MultiPlex Radios- Ask Hitec Customer Service



Message

440GTX -> Hitec working on any new 7+ Ch radios?? (8/8/2007 1:57:55 PM)

I am thinking of buying another Eclipse 7
My trusty 5 year old Eclipse 7 is getting tired. ( broken case , Sticks getting sloppy, Not too much life left in my Tx battery etc )
NOT a single problem in 5 years.
They are a very low cost so the route to go for me is buy a new radio. ( Maybe Spectrum )
So.... Is Hitec working on any new 7+ Ch radios??

Thx

Fred..



MikeMayberry -> RE: Hitec working on any new 7+ Ch radios?? (8/8/2007 6:12:10 PM)

Yes, there is a new 9 channel radio in the works as well as 2.4ghz technology. Unfortunately, I have no info on when these will be available.

Mike.



The Raven -> RE: Hitec working on any new 7+ Ch radios?? (8/9/2007 11:09:14 AM)

The new radio is called Corona. 9 channel, 30 model memories, and apparently a touch screen.

There is no information on whether it will be 2.4Ghz or support various freq modules.

There is a picture of it in my gallery....which I appear unable to link to.



Easystern -> RE: Hitec working on any new 7+ Ch radios?? (10/24/2007 7:26:19 PM)

hey guys,

that sounds great , i am waiting for a new one with more memory as my eclipse and i like the name " corona " is it lite or regular [;)] .

2,4ghz module would be great to !!!

we are two members in our club here overseas and hitec tx fans ,my budy has two eclipse and i have an aditional laser 4.

we are very satisfied with the eclipse's ,also with the QPCM rx

michael



The Raven -> RE: Hitec working on any new 7+ Ch radios?? (10/24/2007 10:46:40 PM)

The Corona will use a new version of PCM, which I assume would make it incompatible with Hitecs QPCM.

I have a one page brochure on the TX which I'll try to post in the next 48hours.



fizzwater2 -> RE: Hitec working on any new 7+ Ch radios?? (10/24/2007 11:19:27 PM)

Any chance it could be configured to have true crossed trims? I sure miss that in my old proline custom competition radio..



Easystern -> RE: Hitec working on any new 7+ Ch radios?? (10/25/2007 7:26:44 PM)

hope not only pcm , i have 3 of the very expencive qpcm rx ones, they are here around 140 $ a piece.

Raven... would be nice to see the brochure, i try to find the hitec webpage in korea .
any idear what the url is
cheers
michael



The Raven -> RE: Hitec working on any new 7+ Ch radios?? (10/25/2007 10:31:04 PM)

I suspect the radio will be available with a number of plug in modules to support 2.4Ghz and whatever 'normal' frequencies used in each country. The radio is listed as supporting PCM and PPM, noting the PCM mode is not QPCM but something else (which I can't recall at the moment).

Work committments are keeping me busy but as soon as I get a chance to scan the brochure I'll put it up here.



The Raven -> RE: Hitec working on any new 7+ Ch radios?? (4/26/2008 11:24:46 AM)

Gee, it's been several years since the Corona radio was mentioned and it's still to be released.

Has anyone heard anything new on it? If there's no anticipated release date I'll probably change over to another brand. It's just been too long between new radios and I'm getting sick of fixing the flimsy cases where the handles attach (no, I'm not rough with my radio).

I'd like to see:

1. A servo-slower function built in
2. Decent memory count (not 5, not 7, not 20, give me 30)
3. Decent case design for strength and light weight design



Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
0.15625