DiveBombDave
Posts: 36
Joined: 3/12/2007 From: , KY, USA Status: offline
|
Bob, Thanks; that's a big relief! I am ordering the TM SR tonight and it should be completed by next weekend, but you never know how these things go. I'm wanting to strip the covering and beef up the tail with lite ply sheet, as this will help offset the larger motor up front (rather than adding lead to the tail, and I'm looking at up to 8oz possibly). Wing bolt mod, among others, may run the build a little longer than I'm expecting. I talked with my father this evening while jumping "Lucy".... I believe we will drive in Saturday morning and stay overnight (possibly at the "Lee's Inn"?) for some action on Sunday. I'm having a problem with her not making much headway (airspeed), and tonight I loosened her steering lines in case there was some flare, and I added some bellyweight (she's only 2lbs without lead, on a 4'x2' chute) and it seemed to help the problem slightly. I plan to experiment with her up to 3lbs before the rally. Hey Bob, is that Juan Fernandez the same guy who made the plans for "Little Juan" the homemade skydiver? That's what I built mine from, if so, and that would be pretty cool. Can somebody post the address of the flying field, or better yet directions to it? Dave edit - Thanks Jules!
< Message edited by DiveBombDave -- 8/16/2007 8:22:55 AM >
|