control change over  
View related threads: (in this forum | in all forums)

Tower Hobbies
Enter up to 4 keywords or Tower stock numbers
Logged in as Guest



Users viewing this topic: none
  Printable Version
       

All Forums >> RC Helicopters >> Electric RC Helis >> Esky Helicopters >> control change over
Page: [1]

Login
Message << Older Topic   Newer Topic >>
control change over - 8/15/2007 10:52:21 PM   
noginblue


 

Posts: 52
Joined: 1/7/2007
From: warminsterwiltshire, UNITED KINGDOM
Status: offline 		does any one know how i could change the controls over on my honey bee king 2, i want the rudder on the right hand stick, as on mine it is on the left stick with the throttle, any help really appriciated cheers
       Post #: 1

RE: control change over - 8/16/2007 4:13:35 AM   
ezveedub



Posts: 428
Joined: 6/8/2007
From: Davie, FL, USA
Status: offline 		Are you trying for Mode 1 or Mode 3/4?? I know it can convert to Mode 1, but not to Mode 3 or Mode 4. Most likely you'll have to rewire the unit.

< Message edited by ezveedub -- 8/16/2007 4:33:58 AM >


_____________________________

Hornet X-3D, Trex 450SE, Mini-Z
MP777, MBX5R , MBX5T, Inferno & Spada 09, MBX6, MP9

(in reply to noginblue)
       Post #: 2

RE: control change over - 8/16/2007 9:54:44 AM   
mrasmm


 

Posts: 4422
Joined: 1/9/2007
From: Sometown, Northern Utah, USA
Status: offline 		with heli's I would really recommend just leaving the cyclic all on one stick. It can get real complicated if you don't. If you don't feel you can learn that way, then you just open up the tx and either swap the pots on these two channels, or swap the wires by soldering them making sure that the wires go on the same way. That can be checked with an ohm meter.

_____________________________

I don't always check every thread I respond to, so feel free to PM me

(in reply to ezveedub)
       Post #: 3

RE: control change over - 8/16/2007 2:08:43 PM   
ezveedub



Posts: 428
Joined: 6/8/2007
From: Davie, FL, USA
Status: offline 		Yeah, I know what your talking about, BUT, the orignal poster is in the UKm from their sig. I find a lot of people in the EU run Mode 1.


_____________________________

Hornet X-3D, Trex 450SE, Mini-Z
MP777, MBX5R , MBX5T, Inferno & Spada 09, MBX6, MP9

(in reply to mrasmm)
       Post #: 4

RE: control change over - 8/16/2007 7:02:43 PM   
noginblue


 

Posts: 52
Joined: 1/7/2007
From: warminsterwiltshire, UNITED KINGDOM
Status: offline 		right i have changed the rudder and alieron over on the pots by soldering them but can now not get the rudder to respond even with the trim centred any ideas

(in reply to ezveedub)
       Post #: 5

RE: control change over - 8/16/2007 11:30:35 PM   
noginblue


 

Posts: 52
Joined: 1/7/2007
From: warminsterwiltshire, UNITED KINGDOM
Status: offline 		i got it sorted just changed the two pots over on the tx

(in reply to noginblue)
       Post #: 6

RE: control change over - 8/17/2007 4:42:26 PM   
abacro


 

Posts: 172
Joined: 10/14/2002
From: Gadsden, AL, USA
Status: offline 		Why didn't u just switch the servo plugs on the rudder and aileron servos in the reciever? Would'a saved you a whole lot of time!


Art

(in reply to noginblue)
       Post #: 7

RE: control change over - 8/17/2007 6:49:45 PM   
noginblue


 

Posts: 52
Joined: 1/7/2007
From: warminsterwiltshire, UNITED KINGDOM
Status: offline 		tried that but would not work, belive me i did try

(in reply to abacro)
       Post #: 8

RE: control change over - 8/17/2007 11:14:07 PM   
ezveedub



Posts: 428
Joined: 6/8/2007
From: Davie, FL, USA
Status: offline
quote:

ORIGINAL: abacro

Why didn't u just switch the servo plugs on the rudder and aileron servos in the reciever? Would'a saved you a whole lot of time!


Art

You can't mix the cyclic servo outputs with rudder. The cyclic programming would screw up the rudder output as you move throttle & cyclic.


_____________________________

Hornet X-3D, Trex 450SE, Mini-Z
MP777, MBX5R , MBX5T, Inferno & Spada 09, MBX6, MP9

(in reply to abacro)
       Post #: 9

RE: control change over - 8/18/2007 12:52:10 AM   
mrasmm


 

Posts: 4422
Joined: 1/9/2007
From: Sometown, Northern Utah, USA
Status: offline 		yeah, you can just switch them on a plane, but a heli has the ccpm function, so you have to do it in the Tx =)

_____________________________

I don't always check every thread I respond to, so feel free to PM me

(in reply to ezveedub)
       Post #: 10

Page:   [1]
All Forums >> RC Helicopters >> Electric RC Helis >> Esky Helicopters >> control change over
Page: [1]





Jump to:


Google 



Search | Marketplace | Event Calendar | Local Clubs | Magazine | Product Ratings | New Products | Discussion Forums

Photo Gallery | Member Video Posts | RCU Video Gallery | Instructor Search | Field|Track|Marina Search

Advertisers | Hobby Vendor Resources | Rate Manufacturers | Sign In/Sign Up

SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.

Charities we support that also need your help
Yorkie Rescue | Humane Society | ASPCA | Crohn's-Colitis America

Kaango.com Classifieds

0.844RCU3