New to the RS4 3 (Full Version)

All Forums >> [RC Cars, Buggies, Trucks, Tanks and more] >> [HPI Racing] >> HPI On-Road



Message


Jeff_Green -> New to the RS4 3 (9/24/2007 3:23:14 AM)

Hey all I see that there isn't much going on in the OnRoad forum any more.
I recently purchased a used RS4 3 .18ss off eBay. It was in good condition but the stock engine the .18ss wont hold a tune and was running in the 300 - 350 degree range must have an air leek. I ended up replacing it with a O.S. .18 CV-R runs great. Now I have a problem with my tires flying off with the high speed I wasn't the one who glued the originals so that must be the problem. Any suggestions for triers and rims? I was thinking something belted would be my best bet. Are there Any hop-ups that are a necessity or have a decent performance increase?
Thanks in advance for your reply,
Jeff




speed racr -> RE: New to the RS4 3 (3/17/2008 1:42:34 AM)

I have the cvr too and it is fast. I suggest the hpi treaded tires and use super glue. It has helped me.




Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
0.078125