PATTERN

PATTERN (Full Version)

All Forums >> [TEAM RCU] >> Team RCU - Don Szczur

Message

marwen1 -> PATTERN (9/24/2007 3:33:13 AM)
Just exactlly, what is: PATTERN flying I was out at a local RC field today testing an engine that is new in my inventory. (It came to me used) One of the flyers came up to me and commentedx thAt this plane that I had would make a "niced pattern plane" ??? I have no idea what he meant marwen1

Don Szczur -> RE: PATTERN (9/24/2007 4:36:53 AM)
Check it out. www.nsrca.org You will have all the details needed. Don

marwen1 -> RE: PATTERN (9/24/2007 5:44:18 AM)
TNX It must be a HUGE web site. I tried the link and all I could get was "searching for "xxxxxxxxxx" marwen1

Don Szczur -> RE: PATTERN (9/25/2007 3:20:37 AM)
This link takes you directly to the frequently asked questions "What is pattern" http://www.nsrca.org/newguysA.htm

marwen1 -> RE: PATTERN (9/25/2007 2:23:41 PM)
For some unknown reason, none of the precious links manage to do anything but go around in circles. thanks anyway marwen1

Jeff Boyd 2 -> RE: PATTERN (9/25/2007 3:25:59 PM)
quote: ORIGINAL: marwen1 For some unknown reason, none of the precious links manage to do anything but go around in circles. thanks anyway marwen1 Hmmmmmm . . the links work fine. One of my buddies can open them from his PC too . . you must have some protection software blocking your attempts. Try holding down the "Ctrl" (control) key as you click on the link . .

marwen1 -> RE: PATTERN (9/25/2007 10:35:07 PM)
NO! Try an old, slow, lack of ram, 7 year old laptop. I'm using this while I can buy what it is that I want in a new computer. marwen1

Scott Smith -> RE: PATTERN (9/26/2007 1:32:50 AM)
If you can load RCU you should be able to load NSRCA.ORG Okay, how about going to the pattern forum and checking out that first sticky?

marwen1 -> RE: PATTERN (9/26/2007 4:58:57 AM)
quote: ORIGINAL: Scott Smith If you can load RCU you should be able to load NSRCA.ORG You are absolutely, 100% correct! Now that we have all hashed this one to death --- facts remain! Thank you ALL -- for being so incredibly helpful. marwen1

Jeff Boyd 2 -> RE: PATTERN (9/26/2007 9:01:55 AM)
quote: ORIGINAL: marwen1 Just exactlly, what is: PATTERN flying I was out at a local RC field today testing an engine that is new in my inventory. (It came to me used) One of the flyers came up to me and commentedx thAt this plane that I had would make a "niced pattern plane" ??? I have no idea what he meant marwen1 Just a thought . . why didn't you ask the guy ????? He obviously knows . . There is plenty of stuff on RCU about Pattern Flying. No point rehashing it all . . just do the search on RCU [8\|]

marwen1 -> RE: PATTERN (9/26/2007 11:14:30 PM)
I didn't dig into what he meant because by the time I had gone out to my car to get another unit to fly with, HE was out on the flight line. He landed and I was still up in the air. At this point in time, it wasn't that relevent that I should chase him down to simply ask him just that. Since all of this has started, I simply went to the "stickies" They pretty much well answered any Q's that I had. marwen1

Page: [1]

SITE MAP! : : FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.

0.203125