Building an Airworld FW-190 (Full Version)

All Forums >> [RC Airplanes] >> RC Warbirds and Warplanes



Message

SNAKE STUKA -> Building an Airworld FW-190 (9/25/2007 1:55:56 PM)

I just purchased an Airworld FW-190 and a DA 100 for power with the standard mufflers. I should receive them next week. If anyone has any building suggestions with servo location, balancing ,sliding canopy methods, etc. please let me know.Thanks in advance.
SNAKE STUKA



t_burley -> RE: Airworld FW-190 Information Requested? (9/25/2007 3:24:02 PM)

get in touch with Dino, he should be able to help steer you in the right direction



SNAKE STUKA -> RE: Building an Airworld FW-190 (9/26/2007 12:42:32 PM)

[:)]I will be purchasing Sierra gear today. Any suggestions on cockpit kits?



SNAKE STUKA -> RE: Building an Airworld FW-190 (10/12/2007 2:34:40 AM)

Well boys, I finally received the airplane and engine. I started cutting out a 1/2 aircraft ply firewall to mount the DA 100.



Ram-bro -> RE: Building an Airworld FW-190 (10/12/2007 2:51:31 AM)

now this will be a build worth watching. How did you seperate the gear doors from the wing



SNAKE STUKA -> RE: Building an Airworld FW-190 (10/12/2007 3:11:44 AM)

I cut it out with a cordless dremel and a thin cut off wheel.



mobyal -> RE: Building an Airworld FW-190 (10/12/2007 3:15:29 AM)

I sure want to watch this one!



Hammbone -> RE: Building an Airworld FW-190 (10/12/2007 4:00:34 AM)

I am seriously considering the purchase of one of these FW-190's, so I will be watching your build with much interest.

Jim



ww2birds -> RE: Building an Airworld FW-190 (10/13/2007 12:22:07 AM)

Quick .. trade in the DA-100 for a RCS 150 or 250 radial !!!

:-)



SNAKE STUKA -> RE: Building an Airworld FW-190 (10/13/2007 1:03:17 AM)

[:)]I have been told that the gear will be here early next week.



SNAKE STUKA -> RE: Building an Airworld FW-190 (10/13/2007 3:09:31 AM)

Here are a couple of pictures



SNAKE STUKA -> RE: Building an Airworld FW-190 (10/13/2007 10:21:08 PM)

More pictures



cgcrc -> RE: Building an Airworld FW-190 (10/14/2007 1:19:51 PM)

Hi Snake Stuka;

Keep up the excellent effort, great pics. Like your use of wood screws re firewall assembly. I use that method all the time on my large models when using the DA 100 etc.

Wanted to purchase a 1/4 scale FW-190 and have looked at building plans, Airworld and Sis-T models. Sis-T are not available until summer of 2008. Sis-t maintain that their FW 190 will be a little more scale in appearance !!!!

From what I've seen of the Airworld it looks pretty good with the panel lines rivets etc.

Thanks again for putting this building thread together.

Regards
Randy






SNAKE STUKA -> RE: Building an Airworld FW-190 (10/14/2007 8:40:03 PM)

More picts



Hammbone -> RE: Building an Airworld FW-190 (10/14/2007 9:25:43 PM)

What's that stuff for?

Jim



SNAKE STUKA -> RE: Building an Airworld FW-190 (10/14/2007 11:02:51 PM)

Those are the cowl brackets and wing holdown block.



SNAKE STUKA -> RE: Building an Airworld FW-190 (10/14/2007 11:04:50 PM)

Pics



SNAKE STUKA -> RE: Building an Airworld FW-190 (10/14/2007 11:10:41 PM)

When the cowl brackets are dry I will remove the firewall and center the engine on the 1/2 firewall with the cowl attached.Then I will screw the motor box to the firewall.



SNAKE STUKA -> RE: Building an Airworld FW-190 (10/17/2007 1:30:30 AM)

I just received the gear yesterday.It seems that retrofitting the gear is going to be a job.Any suggestions?



SNAKE STUKA -> RE: Building an Airworld FW-190 (10/17/2007 1:34:53 AM)

Picts



SNAKE STUKA -> RE: Building an Airworld FW-190 (10/17/2007 1:41:19 AM)

Picts



grw57 -> RE: Building an Airworld FW-190 (10/17/2007 2:01:04 AM)

Hey Rich is that you?



SNAKE STUKA -> RE: Building an Airworld FW-190 (10/17/2007 2:21:12 AM)

Yes. Who is this.



Hammbone -> RE: Building an Airworld FW-190 (10/17/2007 3:09:59 AM)


quote:

ORIGINAL: SNAKE STUKA

I just received the gear yesterday.It seems that retrofitting the gear is going to be a job.Any suggestions?


Looks like the gear fits to me. Am I missing something?

Jim



SNAKE STUKA -> RE: Building an Airworld FW-190 (10/17/2007 5:36:59 PM)

Picts



Page: [1] 2 3 4 5 6   next >   >>  

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
0.0625