960 charging 4200 EP packs (Full Version)

All Forums >> [Radios, Batteries, Clubhouse and more] >> Batteries & Chargers >> MRC Charger Product Support (i.e. Super Brain, etc)



Message

Thunderstick -> 960 charging 4200 EP packs (9/25/2007 4:49:01 PM)

I have a Superbrain 960 and just bought a 7 cell EP 4200mAh hump pack.
What should the peak threshold be set at, or should I just hit the start button and let the Brain decide it?

Also it falsed peak the first time I charged it. So I hit the start again and it charged for another 20 mins then peak again. The cells were 95 to 98 degrees F. I guess this is normal for new cells for the first couple of times charging them?

Thanks



Tim@MRC -> RE: 960 charging 4200 EP packs (9/25/2007 7:54:48 PM)

I would charge it at 4 amps and 35 mv. The charger should pick the appropriate peak setting, I would just change the charge rate to 4. After the first charge you can then charge it at 4.5 amps.



Thunderstick -> RE: 960 charging 4200 EP packs (9/26/2007 3:49:20 AM)

Thank you Tim for the prompt reply. [:D]



Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
0.0625