phoenix 80 (Full Version)

All Forums >> [Radios, Batteries, Clubhouse and more] >> Batteries & Chargers >> A123Racing Support



Message

incarus -> phoenix 80 (10/28/2007 8:12:43 PM)

i have a Phoenix 80 amp speed controller at home and want to put it to use. I do not have a motor or battaries for it.

I was hoping some one could recommend an airframe that would use the 123 battaries that would employ this ESC. I want an airframe that would be a fun 3D airplane. Also if you could recommend the size/power of the battary needed for this set up along with motors

thanks



incarus -> RE: phoenix 80 (10/28/2007 8:14:03 PM)

also how many cells etc would this 80 amp controller handle with a good margin of comfort? I know this unit can handle upto 6 cell lipos



everydayflyer -> RE: phoenix 80 (10/29/2007 7:35:12 PM)

I use a CC Phoenix 60 on a couple of aircraft using 5S A123 packs.
One is a Electrified Sig Fazer ,AXI 2826-12 , APC 13X6.5E prop , just over 600 watts. and 43Amps.

other one is a S Hobby Shop Extra 300 SHP the 47" version. Scorpion 3026-10 , APC 13X6.5E , on 4S close to 600 watts and 50Amps. , on 5S just over 800 watts at 70 amps.



Charles



Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
0.078125