a123 build balance tab diagram (Full Version)

All Forums >> [Radios, Batteries, Clubhouse and more] >> Batteries & Chargers >> A123Racing Support



Message

incarus -> a123 build balance tab diagram (11/18/2007 5:45:27 AM)

I am going to build a 6 cell pack, and a 5 cell pack.

I dont know where to place the balance tabs

does anyone have a schematic/diagram of where to place the leads.



Red Scholefield -> RE: a123 build balance tab diagram (11/18/2007 12:21:25 PM)


quote:

ORIGINAL: incarus

I am going to build a 6 cell pack, and a 5 cell pack.

I dont know where to place the balance tabs

does anyone have a schematic/diagram of where to place the leads.


Between each cell and on the positive and negative terminals. Depends on the type of balance connector used and the balancing device. Normally they go in sequence, negative, next node, next node until you get to the positive terminal.



everydayflyer -> RE: a123 build balance tab diagram (11/18/2007 2:07:56 PM)

Go here:

http://scriptasylum.com/rc_speed/_lipo.html

input number of cells and check yes for balancing


Charles



incarus -> RE: a123 build balance tab diagram (11/18/2007 2:45:48 PM)

I am going to use a brand new hyperion eios s cell charging balancer that can do A123s

I will be using hyperion balance tabs(7pin)



Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
0.21875