Extreme Flight 110" 100cc Yak 54 Build! (Full Version)

All Forums >> [RC Airplanes] >> Giant Scale Aircraft - 3D & Aerobatic



Message

Flyin Hawaiian -> Extreme Flight 110" 100cc Yak 54 Build! (12/1/2007 7:35:11 PM)

Hey All!

I hooked up with the MAN, Chris H. this morning and picked up the 110" Yak 54 [:D]! Before I get started I just want to say is, that the reason I had to meet Chris, is that the 110" Yak did not come ready for shipping, so we agreed to meet half way from FLA and GA. Now after inspecting the plane, its perfedtion was flawed by shipping damage just being in a big freight container. The fuse was compressed a little so the inside sheeting of the wing pocket had slight damage, nothing major and an easy fix. Now, had it been ready for shipping like the 88" Yaks and Extras, There probably would have not been any damage because of box compression to the fusealage. Extreme Flight takes extra step to protect their products with ply-wood skeleton and double boxing.

Also to my surprise, I picked up a 50cc Blue and Yellow Extra 300[:D][:D], it arrived in perfect condition, ply-wood skeleton and all. In additon i picked up the new electric plane that has raised the bar, the 58" Extra 300. I will post pics of the 50cc Extra on the other EF thread.

Anyway on with the 110" Yak 54. I un-packed and inspected everything. The Carbon Fiber LG is awesome!. Airfoiled and strong!. All I can say is that the 110" is built just like the 88", but BIGGER! I put he 88" cowling side by side with the 110" for comparison. Also see the difference in the wing next to the QQ 102" Yak wing. OH YEAH![sm=thumbup.gif]



Flyin Hawaiian -> RE: Extreme Flight 110" Build Thead (12/1/2007 7:41:17 PM)

Chris Hinson will be building the other 110" Yak 54 and he will be installing the DA 85 w/ tuned pipe. That should be an interesting combination! He will be chiming in on this thread when he starts his build.



Flyin Hawaiian -> RE: Extreme Flight 110" Build Thead (12/1/2007 7:48:10 PM)

Here I am just checking the length of the tuned pipe tunnel w/ the ES Composite tuned pipes. Looks like there is plenty of room!

Rennie



Flyin Hawaiian -> RE: Extreme Flight 110" Build Thead (12/1/2007 10:51:19 PM)

and the wings........ 102" QQ Yak wing for comparison.



turbo2000 -> RE: Extreme Flight 110" 100cc Yak 54 Build! (12/1/2007 11:26:29 PM)

Looking good. I can't wait for this one.

What engine? When are these available.?



Jake Ruddy -> RE: Extreme Flight 110" 100cc Yak 54 Build! (12/2/2007 1:51:06 AM)

DA 100... should be available X-mas week...

Course mine will get treated to a Brillelli 120 :D



vfalcon7 -> RE: Extreme Flight 110" 100cc Yak 54 Build! (12/2/2007 1:52:28 AM)

Looks like I will have to trade my Highlander in... I was lucky to fit the 88" in. I know this is premature, could you get a length from end of cowl to end of rudder? This would be the deciding factor for me. I am on the list for the Extra but if I can shoe horn this thing in I am going for it. Thanks and it looks like you are off to a good start.



Jake Ruddy -> RE: Extreme Flight 110" 100cc Yak 54 Build! (12/2/2007 1:54:07 AM)

It's gotta be close to 100".. its pretty big

I am breaking down and getting a mini-van haha.. never thought I would see the day (didnt really plan kids) but with planes like this coming out its hard to say no :) I dont want a trailer.



Josey Wales -> RE: Extreme Flight 110" 100cc Yak 54 Build! (12/2/2007 2:10:48 AM)


quote:

ORIGINAL: sinergy

Course mine will get treated to a Brillelli 120 :D


Me too![:D]



GalenB -> RE: Extreme Flight 110" 100cc Yak 54 Build! (12/2/2007 2:23:44 AM)

Rennie,

Can you measure the gear and tell me the tread width? Also -- will the spats add any width?

TIA!



Rush7 -> RE: Extreme Flight 110" 100cc Yak 54 Build! (12/2/2007 4:28:06 AM)

Man this plane makes me want to put a forsale sign on my faithful Panzl. Rennie that plane looks awesome. If I can swing one I hope to get it in the original EF colors. I think the retro look is awesome. I have already put my 87" Yak up forsale in preperation for the arrival of the Extra. Looks like I may have to clean more of the hanger out to make room for some EF planes.

Chris just keeps stepping up to the plate and knocking them out of the park. I would hate to be in his shoes here at Christmas time with some many great planes coming out. He is going to be one very busy man.



Flyin Hawaiian -> RE: Extreme Flight 110" 100cc Yak 54 Build! (12/2/2007 5:12:11 AM)

Chris H is a very busy man already. He has the new 58" Extra 300 in stock, as well as the 88" and 74" Yak 54s, electric Yak 54, 47" Electric Yaks and Edges, planes are being shipped out of Extreme Flight daily! I hope everyone has a very happy Extreme Flight Christmas![sm=biggrin.gif]



Flyin Hawaiian -> RE: Extreme Flight 110" 100cc Yak 54 Build! (12/2/2007 5:31:47 AM)


quote:

ORIGINAL: GalenB

Rennie,

Can you measure the gear and tell me the tread width? Also -- will the spats add any width?

TIA!


Actual LG width is 26", with tires and axles will be about 30". Spads will add hardly anything.



GalenB -> RE: Extreme Flight 110" 100cc Yak 54 Build! (12/2/2007 6:06:28 AM)


quote:

ORIGINAL: Flyin Hawaiian


quote:

ORIGINAL: GalenB

Rennie,

Can you measure the gear and tell me the tread width? Also -- will the spats add any width?

TIA!


Actual LG width is 26", with tires and axles will be about 30". Spads will add hardly anything.


Thanks Rennie! This means it will just fit in my chosen space! Storing and transporting this plane is a real challenge for me, but it looks like it will just fit in the garage and in my Explorer.



MicroDat -> RE: Extreme Flight 110" 100cc Yak 54 Build! (12/2/2007 6:19:25 AM)

Tell Chris to get the Extras on the EF store already, I want to start building :)



Flyin Hawaiian -> RE: Extreme Flight 110" 100cc Yak 54 Build! (12/2/2007 11:03:54 AM)


quote:

ORIGINAL: sinergy

DA 100... should be available X-mas week...

Course mine will get treated to a Brillelli 120 :D


Actually the 50cc Extra 300 will be available week of Christmas, the 110" Yaks should be here by the end of January.



flying skunks -> RE: Extreme Flight 110" 100cc Yak 54 Build! (12/2/2007 12:28:50 PM)

cant wait to fly it [:D][:D]



Josey Wales -> RE: Extreme Flight 110" 100cc Yak 54 Build! (12/2/2007 7:50:18 PM)

Rennie--can you give us the length of the fuse ?



Flyin Hawaiian -> RE: Extreme Flight 110" 100cc Yak 54 Build! (12/2/2007 8:18:35 PM)

I 'll give you one better joe!



Fuse- 76"
Rudder 12.5"
DA w/ 1" spacers 7.5"
Spinner 5"

approx total fuse length: 101"

I have an RFI into Chris H. to see what he recommends for the DA engine spacing, or the recommended distance from the firewall to spinner back plate. I believe I am pretty close though. I like the numbers already, a 100cc aircraft 110" x 101" , thats huge, and my goal is a realistic 26.5 to 27 LBs. ..............Float like a butterfly and stings like a Bee, ...........The 100cc Extreme Flight Rumble Bee![sm=wink_smile.gif]



Josey Wales -> RE: Extreme Flight 110" 100cc Yak 54 Build! (12/2/2007 8:39:14 PM)

Cool! Now I dont have to buy a new truck for it! LOL!![:)]



dbrford -> RE: Extreme Flight 110" 100cc Yak 54 Build! (12/2/2007 8:49:06 PM)

Rennie,

Can you shoot some pics of the fuse next to the QQ yak fuse? Would like to see a comparison.

Thanks,
Dave



xtraflyr -> RE: Extreme Flight 110" 100cc Yak 54 Build! (12/2/2007 9:06:01 PM)

AH!! Here is where you guys are hanging out!! Thanks for the build up Rennie.. I cant wait until the DA85 gets a turn to pull it around.

Cya,
Frank

ps any idea about the new Brillelli,price,avail. ect.?



Jake Ruddy -> RE: Extreme Flight 110" 100cc Yak 54 Build! (12/2/2007 9:32:15 PM)

/me can't stop drooling hah

No Pricing on the Brillelli 120... won't avilable till early next year... no official date yet



Flyin Hawaiian -> RE: Extreme Flight 110" 100cc Yak 54 Build! (12/3/2007 3:26:34 PM)

Hey all,

I will be mounting the motor and start laying out all of the internal components, and start making mounting plates for power box, batteries, receivers, and ignition cut-off and related items. The rudder servo location has no provisions for tandem servo set-up, so I will have to make my own rudder servo tray. I will also will be laying out the tuned pipe fuse cut-outs and cooling holes. The Carbon Fiber tuned pipes tend to retain heat instead of dissapating heat like aluminum. So I will have to make sure that there is plenty of air circulating around the exhaust pipes.



Josey Wales -> RE: Extreme Flight 110" 100cc Yak 54 Build! (12/3/2007 7:12:42 PM)

Rennie--how was the performance on the single 8711 servo ?

You think you could fit a SWB servo tray for the 2 rudder servos ?



Page: [1] 2 3 4 5 6 7 8 9 10   next >   >>  

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
0.234375