Wing Sheeting Thickness (Full Version)

All Forums >> [RC Airplanes] >> Giant Scale Aircraft - 3D & Aerobatic >> Carden Aircraft



Message

mrbigg -> Wing Sheeting Thickness (1/4/2008 4:20:57 PM)

What's the thickness of the wood Carden uses for their wing sheeting?



Flyin Woodbutcher -> RE: Wing Sheeting Thickness (1/4/2008 4:55:09 PM)

1/16



mrbigg -> RE: Wing Sheeting Thickness (1/4/2008 5:51:40 PM)


quote:

ORIGINAL: Flyin Woodbutcher

1/16

Thanks, Joel.



n8rloves2fly -> RE: Wing Sheeting Thickness (1/5/2008 4:08:00 AM)

are you sure its not 3/32?



Kaos1964 -> RE: Wing Sheeting Thickness (1/5/2008 5:04:45 AM)

I believe the 35%'s are 1/16, 40% are 3/32. I've been wrong before, so someone else may want to confirm...



Flyin Woodbutcher -> RE: Wing Sheeting Thickness (1/5/2008 12:44:13 PM)

positive all The Cardens are 1/16



as722 -> RE: Wing Sheeting Thickness (1/5/2008 2:23:06 PM)

It's all 1/16" however the density on the 35% sheeting is less than on the 40% kits.


Albert



Kaos1964 -> RE: Wing Sheeting Thickness (1/5/2008 4:01:18 PM)

I stand corrected thanks guys.



Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
0.1088867