quadra 35 glow (Full Version)

All Forums >> [Glow Engines, Gas Engines, Fuel & Mfg Support Forums] >> RC Fuels



Message

hammer 50 -> quadra 35 glow (1/10/2008 1:36:00 PM)

Just got a QUADRA 35 GLOW ENGINE . Can someone tell me what type of fuel to run in it? I know that some of the bigger glow engines like little or no nitro like the Fai 80-20 for my 135 mokis but I was wondering about the oil ratio?



MOTORMAN37 -> RE: quadra 35 glow (1/10/2008 8:09:13 PM)

I ran my Quadra 35 gas version on 50:1 for many years. I am thinking you could get by with 32-1 no problem. You will have to figure out the percentage yourself. The engine is all needle bearings (no ball bearing's) and they require the least amount of lube.[:D] Look on the back of a Klozt jug, it will tell you how to mix it with alcohol. I would run a little castor in it too.[:D]



hammer 50 -> RE: quadra 35 glow (1/11/2008 12:37:47 PM)

thaks for the info I will check it out



Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
0.0859375