Hitec Lynx 3D

Hitec Lynx 3D (Full Version)

All Forums >> [Radios, Batteries, Clubhouse and more] >> RC Radios, Transmitters, Receivers, Servos, gyros >> Radio Manufacturer Direct Support >> Hitec/MultiPlex Radios- Ask Hitec Customer Service

Message

aero750rider -> Hitec Lynx 3D (1/14/2008 7:53:23 PM)
I have the Lynx 3D and I want to get the spektrum receiver and module for all my cars and trucks. Should I just buy the receivers and the module or should I go ahead and get the Spektrum radio also so everything will be Spektum. Thanks

aero750rider -> RE: Hitec Lynx 3D (1/15/2008 1:05:33 AM)
must be a really stupid question if noone is aswering me[:D][sm=teeth_smile.gif]

MikeMayberry -> RE: Hitec Lynx 3D (1/15/2008 6:07:35 PM)
The Spektrum module and RX will work with the Lynx 3D. Mike.

aero750rider -> RE: Hitec Lynx 3D (1/15/2008 7:26:03 PM)
thanks

aero750rider -> RE: Hitec Lynx 3D (1/27/2008 12:38:43 AM)
i'm sure you know more about this then they do. because it says you are a Hitec Rep. but i went to my LHS today and they told me that the spekturm mod and receiver will not work with the Lynx 3D.

MikeMayberry -> RE: Hitec Lynx 3D (1/29/2008 6:56:51 PM)
The Spektrum system for Fut/Hitec will work with the SRX/CRX/and older Lynx 3D since they all use the same size module. Mike.

aero750rider -> RE: Hitec Lynx 3D (1/31/2008 3:05:03 PM)
thanks i will order them for my lynx 3D. i was worried i would have to buy a whole complete radio system.

mrpricelessp -> RE: Hitec Lynx 3D (5/8/2008 11:36:36 PM)
how is the hitec lynx 3d in comparison to the spektrum dx3 if i was to purchase one on ebay what would reasonable price be basically i want to know how good the hitec is

MikeMayberry -> RE: Hitec Lynx 3D (5/12/2008 9:02:02 PM)
Here's the manual if you want to compare the features for yourself: http://www.hitecrcd.com/Manuals/Radio/lymx3DMnl.pdf I have no idea what they would go for used on ebay... you'll have to reseach that yourself. Mike.

KARUPT -> RE: Hitec Lynx 3D (5/13/2008 6:29:36 AM)
i own that 3d but did not realize it would work like that, is there a confirmation that it worked one hundred percent before i go and buy the parts?

MikeMayberry -> RE: Hitec Lynx 3D (5/13/2008 7:47:43 PM)
?????? I don't understand your question. [:o] Mike

Page: [1]

0.21875