Kirkland Nutcracker Pattern Plane (Full Version)

All Forums >> [RC Airplanes] >> Pattern Flying >> Classic Pattern Flying



Message

sceptreac -> Kirkland Nutcracker Pattern Plane (1/25/2008 4:12:07 AM)

Does anyone have an information on the Kirkland Nutcracker?
I obtained a copy of the plan that was included in the Airborne Associates kit.
From that I am going to build the airplane but I would appreciate any further information.
The only photo I have is from an online scanned copy of a Steve Helms review of the Airborne Associates kit.
If anyone has a kit - an actual plane - or any info at all it will help me to get the model built properly.




burtona -> RE: Classic pattern flying (1/25/2008 2:40:34 PM)

I flew a couple or three of them back when they were available from Airborne. I probably have some pictures somewhere but no pieces left. They were really good planes for the time. The best of Kirklands IMO. George Hill (Airborne owner) & I experimented with a couple of them by lengthing the nose, changing the wing plan somewhat, anhedral stab, etc. but I'm not sure we improved the plane as Jim designed it. It was fun to try different stuff though.



roncoleman -> RE: Classic pattern flying (1/25/2008 2:59:01 PM)

sceptreac,

Would it be possible to get a copy of the review
or maybe you can posted it here for all to see.

Thanks



sceptreac -> RE: Classic pattern flying (1/25/2008 7:56:35 PM)

This is the article I found on the web.
As I mentioned a fellow SPA member sent me a copy of the Airborne plans.
I will have no trouble redesigning the plane from them as to planform and aerodynamics,
but to make it true to the original it would be nice to see a few photos.

Thanks for the replies - I hope the attachments posted - find out now...



nxtdoor -> RE: Classic pattern flying (1/25/2008 8:52:04 PM)

I to flew a Nutcracker. Great looking plane for the day. I flew in the Missouri/Illinois area and never saw another.
I am with you, if anymore info is available, I'd like to see it also.

Jeff



roncoleman -> RE: Classic pattern flying (1/26/2008 1:21:45 PM)

sceptreac,

Thanks for posting the review. I never had one but I've always liked
the looks of the Nutcracker. Would you know what year the articel was
written? Maybe you should change the subject of this thread or just add
the name, you might pull in someone who has more info/photos. I would
like to see more info/photos also.



RFJ -> RE: Classic pattern flying (1/26/2008 2:04:12 PM)

quote:

Would you know what year the articel was
written?


No, but the Airborne Associates kit for the Nutcracker, with foam wings and glass fuselage, was introduced in mid 1973 for $59.95.

Ray



roncoleman -> RE: Classic pattern flying (1/26/2008 2:35:01 PM)

Ray that was a lot of money back in 73. Are there any pictures
in their ad you can post?

Ron



RFJ -> RE: Classic pattern flying (1/26/2008 3:00:57 PM)

Ron,

My info came from a Toledo show report and the only photograph was the little tiny one shown below. I know there are better shots around as I remember at the time thinking what an attractive design it was but no way could I afford it - as you say, big money!

I agree that sceptreac should change the thread title to attract more passing trade. Someone will have better shots.

Ray




sceptreac -> RE: Classic pattern flying (1/27/2008 1:14:47 PM)

Ray,

That is the best photo I have seen so far - thanks.

Craig



nxtdoor -> RE: Classic pattern flying (1/27/2008 5:42:10 PM)

Anyone have any dimensions on the Nutcracker. I would love to scratchbuild one.

Jeff



kr9x -> RE: Classic pattern flying (1/27/2008 11:34:06 PM)

This is one of my projects for 2008. I have started on the plans but have a long way to go. I built one and flew it back in 73 or 74 but sold it to a better flyer, back when I lived near Chicago. My current project is the Kirkland A-6 Intruder.

Jon
SPA 261



Mad Man Marko-RCU -> RE: Classic pattern flying (1/28/2008 1:48:12 AM)

I remember a couple of guys in the R/C Propbusters club had Kirkland Nutcrackers back in the seventies. We used to have a pattern/scale contest in Waterford, CT in the seventies. Back then the contests in the northeast almost always had pattern combined with standoff scale. I remember a few guys using the Top Flite Mustang or Warhawk in both scale and A or B pattern.
Kirkland's Nutcracker was a good flying ship with the Tiger Bluehead or Webra Blackhead on a muffler. The local hobby shop man still has a couple of builtup Nutcrackers in his Perhaps I can talk him into taking one down and get some pics in the future.


Peace


Mark O

[:D][:D][:D]



sceptreac -> RE: Classic pattern flying (1/28/2008 1:52:43 PM)

It is great to see the responses to this subject.
I will dig out my plans after I finish my move to Seattle and will provide them to anyone ( Jeff ) who would like a copy.
I move on March 5th so it will be after that.
It will really great if Mark O. can get some photos.
Better yet maybe the owner would sell one of his so I could duplicate it easier.

Craig



kestrel0222 -> RE: Kirkland Nutcracker Pattern Plane (1/28/2008 5:10:47 PM)

Where can I get a set of plans for the Nutcracker?



nxtdoor -> RE: Kirkland Nutcracker Pattern Plane (1/28/2008 7:07:52 PM)

craig, I will take you up on that offer of the plns when you get around to it!
I got to fly my Nutcracker one time at a contest before I planted it. I had won abest finish award with that plane too. It was all hand rubbed dope; was good looking plane.

Look forward to hearing from you after your move.

Jeff



roncoleman -> RE: Classic pattern flying (1/28/2008 10:53:41 PM)

Put me down for a copy also.

Ron



casniffer -> RE: Classic pattern flying (1/29/2008 3:31:15 AM)

I would appreciate a copy of the plans!

Thanks
CAsniffer



BevoHoward -> RE: Classic pattern flying (1/29/2008 11:19:18 AM)

Hello Everybody,

Could one of you point me in the right direction on how to post pictures? A few years back their was a thread with step by step instruction, but I can't find anything. Probably right under my nose.

I have two Nutcracker kits. Both, appear to be Skyglass kits. Both I came across a few years back. One on Eb, and one hanging in a hobby shop. My first Nutcracker was an Airborne kit and has long since been retired. I probably still have pictures of it somewhere.

If I can be of any help, let me know

What ever happened to George Hill? He use to spend a lot of time under our tent.

--I just noticed the link to "click here to upload images"



kestrel0222 -> RE: Classic pattern flying (1/29/2008 12:06:18 PM)

All you have to do is click on "reply" at the top of the last post. At the bottom of the reply page is a link "click here to upload images and files" Hope this helps



kestrel0222 -> RE: Kirkland Nutcracker Pattern Plane (1/29/2008 5:24:33 PM)

Craig,

I also would like a set of plans when you get settled in!!

Thanks,



dwaynenancy -> RE: Kirkland Nutcracker Pattern Plane (1/31/2008 4:42:22 AM)

I would like a set of plans too. Dwayne



sceptreac -> RE: Kirkland Nutcracker Pattern Plane (5/7/2008 7:06:38 AM)

Hello everyone I am nearly moved - so I will be able to get copies of the Nutcracker plans for the people who still want one - in a few weeks.

However I have even better news.
Dan Guipe of Wing Mfg now has Nutcracker kits!

Contact him at the e-mail address on his website.



Free Bird -> RE: Kirkland Nutcracker Pattern Plane (5/7/2008 3:20:19 PM)

awesome news!!



Atlanta 60 -> RE: Kirkland Nutcracker Pattern Plane (5/7/2008 3:24:35 PM)

I'd Love a set of plans!!



Page: [1] 2   next >   >>  

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
0.296875