35% DA-100 Mounting  
View related threads: (in this forum | in all forums)

Tower Hobbies
Enter up to 4 keywords or Tower stock numbers
Logged in as Guest



Users viewing this topic: none
  Printable Version
       

All Forums >> RC Airplanes >> Giant Scale Aircraft - 3D & Aerobatic >> WildHare R/C Support >> 35% DA-100 Mounting
Page: [1]

Login
Message << Older Topic   Newer Topic >>
35% DA-100 Mounting - 1/26/2008 10:36:21 PM   
Grotesquebass



Posts: 634
Joined: 9/25/2004
From: lexington park , MD, USA
Status: offline 		Tom,
How is the DA100 mounted on the 35%? is it just by using some thick ply behind it or is it a spacer method like on the aeroworks planes? i see u have a da-100 mounting kit for it could you explain what is in this? thanks

_____________________________

"I've got a fever and the only prescription is more cowbell"
       Post #: 1

RE: 35% DA-100 Mounting - 1/27/2008 12:17:29 AM   
rctom



Posts: 5199
Joined: 5/8/2002
From: Flower Mound (near Dallas), TX, USA
Status: offline 		My mounting kit is done by epoxying 3/4" square oak to a ply plate, then I cut it to the proper length and drill the oak.

It's like having standoffs except that it can't rock back and forth. It's done in 2 pieces (top and bottom) leaving the sides clear to get at the carb for adjustments.

Photos below.

TF

Attachments
Click to see fullsize image.
Click for fullsize 		Click to see fullsize image.
Click for fullsize

(in reply to Grotesquebass)
       Post #: 2

RE: 35% DA-100 Mounting - 1/27/2008 12:19:12 AM   
Grotesquebass



Posts: 634
Joined: 9/25/2004
From: lexington park , MD, USA
Status: offline 		does this come with the 35% ? my other question is what is the distance between the center of the lg to the tip of the rudder? am double and triple checking the truck

< Message edited by Grotesquebass -- 1/27/2008 12:51:38 AM >

_____________________________

"I've got a fever and the only prescription is more cowbell"

(in reply to rctom)
       Post #: 3

RE: 35% DA-100 Mounting - 1/27/2008 3:08:16 AM   
rctom



Posts: 5199
Joined: 5/8/2002
From: Flower Mound (near Dallas), TX, USA
Status: offline 		I normally charge $25 for the mounting kit, that also gives you the long screws, blind nuts and washers, but for the navy, check with me when you order.

Maybe somebody else will help with the measurement, I don't have one around here that's not in a box.

TF

(in reply to Grotesquebass)
       Post #: 4

RE: 35% DA-100 Mounting - 1/27/2008 3:25:39 AM   
Grotesquebass



Posts: 634
Joined: 9/25/2004
From: lexington park , MD, USA
Status: offline 		do u have any picsw of the other scheme u have besides the yellow one and the other one thats red with white on top or could u explain so we can get a mental image wife wants to pick color she's KILLIN me...

< Message edited by Grotesquebass -- 1/27/2008 1:43:36 PM >

_____________________________

"I've got a fever and the only prescription is more cowbell"

(in reply to rctom)
       Post #: 5

RE: 35% DA-100 Mounting - 1/27/2008 3:32:38 PM   
rctom



Posts: 5199
Joined: 5/8/2002
From: Flower Mound (near Dallas), TX, USA
Status: offline 		There are 3 color sets. BLue/yellow, red/white, and blue/white.

In these photos the red/white and blue white are actually the 41% Extra, but it's the same plane. The blue on the blue white 35% Extra is actually a slightly lighter blue than what is in these photos. It is like what is used on the 102" Sukhoi, it's very pretty.

TF


Attachments
Click to see fullsize image.
Click for fullsize 		Click to see fullsize image.
Click for fullsize 		Click to see fullsize image.
Click for fullsize 		Click to see fullsize image.
Click for fullsize

(in reply to Grotesquebass)
       Post #: 6

RE: 35% DA-100 Mounting - 1/27/2008 4:05:42 PM   
Grotesquebass



Posts: 634
Joined: 9/25/2004
From: lexington park , MD, USA
Status: offline 		she is sold on the white and blue bummer i like the yellow one let me see if i can talk her out of it i have till tuesday

_____________________________

"I've got a fever and the only prescription is more cowbell"

(in reply to rctom)
       Post #: 7

RE: 35% DA-100 Mounting - 1/27/2008 7:43:01 PM   
rxfish


 

Posts: 72
Joined: 6/12/2005
From: , TN, USA
Status: offline 		77 and 1/2 inches(give or take a smidgin) I only have a 6 inch ruler!

(in reply to Grotesquebass)
       Post #: 8

RE: 35% DA-100 Mounting - 1/27/2008 8:12:00 PM   
Grotesquebass



Posts: 634
Joined: 9/25/2004
From: lexington park , MD, USA
Status: offline 		well heck thats alot i'd say thats going outta your way its much appriciated looks like she'll fit

< Message edited by Grotesquebass -- 2/1/2008 2:35:07 AM >

_____________________________

"I've got a fever and the only prescription is more cowbell"

(in reply to rxfish)
       Post #: 9

Page:   [1]
All Forums >> RC Airplanes >> Giant Scale Aircraft - 3D & Aerobatic >> WildHare R/C Support >> 35% DA-100 Mounting
Page: [1]





Jump to:


Google 



Search | Marketplace | Event Calendar | Local Clubs | Magazine | Product Ratings | New Products | Discussion Forums

Photo Gallery | Member Video Posts | RCU Video Gallery | Instructor Search | Field|Track|Marina Search

Advertisers | Hobby Vendor Resources | Rate Manufacturers | Sign In/Sign Up

SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.

Charities we support that also need your help
Yorkie Rescue | Humane Society | ASPCA | Crohn's-Colitis America

Kaango.com Classifieds

0.516RCU1