What engine for flip 3D?  
View related threads: (in this forum | in all forums)

Tower Hobbies
Enter up to 4 keywords or Tower stock numbers
Logged in as Guest



Users viewing this topic: none
  Printable Version
       

All Forums >> Glow Engines, Gas Engines, Fuel & Mfg Support Forums >> Engine Manufacturers Direct Support Forum >> Jett Engineering Support >> What engine for flip 3D?
Page: [1]

Login
Message << Older Topic   Newer Topic >>
What engine for flip 3D? - 4/17/2003 11:32:28 PM   
Victor L. Baney


 

Posts: 4
Joined: 11/15/2002
From: Spring, TX, USA
Status: offline 		I have a Flip 3D kit waiting to be build, what Jett engine would you recomend for full 3D capabilities. I havn't found any threads from subcribers mentioning the use of Jett engines. There is a lot of discussions regarding other brands which are all good, but I would love to use either a Jett .46 or .50. What are your suggestions.

Best regards,

Vic

_____________________________

Vic Baney
       Post #: 1

What engine for flip 3D? - 4/18/2003 1:00:52 AM   
bob27s



Posts: 4637
Joined: 4/9/2002
From: Cleveland, OH, USA
Status: offline 		Hi,

Thank you for writing.....

Great question! And some good timing

At the Toledo show, we introduced our BRAND NEW
Jett 65L 3D engine !

This engine is the same physical size as our famous 40,46 and 50. It comes with our new Lite-Jett non-tuned muffler.... combining for a total weight of only 14.5 ounces!

The larger displacement allows outstanding power, while using a non-tuned muffler. For 3D work, the tuned effect works against you as the engine trys to jump on-and-off the pipe as you transition from midrange to full power. That is not desireable for 3D flying and hovering. This engine works great with the APC 12.25 x 3.75 funfly/3D prop at about 14,000 rpm peak. Other props will work within that rpm range.

I am a bit behind getting the info up on the web site, but I have attached an image. (comes with spinner nut not shown).

Price of the engines are 275 for the .60L 3D and 295 for the .65L. BSE (bar stock crank case) is 40.00 more.

I hope this is helpful

Bob Brassell

Attachments
Click to see fullsize image.
Click for fullsize

(in reply to Victor L. Baney)
       Post #: 2

What engine for flip 3D? - 4/19/2003 7:01:30 AM   
Victor L. Baney


 

Posts: 4
Joined: 11/15/2002
From: Spring, TX, USA
Status: offline 		Thanks Bob,

Your reply was timely and just the answer I was looking for! I will be ordering the engine you recomend.

Thanks again

Vic

_____________________________

Vic Baney

(in reply to Victor L. Baney)
       Post #: 3

What engine for flip 3D? - 4/19/2003 7:59:43 AM   
bob27s



Posts: 4637
Joined: 4/9/2002
From: Cleveland, OH, USA
Status: offline 		Glad I could be of help.....!

Bob

(in reply to Victor L. Baney)
       Post #: 4

Page:   [1]
All Forums >> Glow Engines, Gas Engines, Fuel & Mfg Support Forums >> Engine Manufacturers Direct Support Forum >> Jett Engineering Support >> What engine for flip 3D?
Page: [1]





Jump to:


Google 



Search | Marketplace | Event Calendar | Local Clubs | Magazine | Product Ratings | New Products | Discussion Forums

Photo Gallery | Member Video Posts | RCU Video Gallery | Instructor Search | Field|Track|Marina Search

Advertisers | Hobby Vendor Resources | Rate Manufacturers | Sign In/Sign Up

SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.

Charities we support that also need your help
Yorkie Rescue | Humane Society | ASPCA | Crohn's-Colitis America

Kaango.com Classifieds

0.469RCU1