Nitro glass parts composition (Full Version)

All Forums >> [RC Airplanes] >> ARF or RTF >> NitroModels Support



Message

ram3500-RCU -> Nitro glass parts composition (2/8/2008 5:23:53 AM)

I am changing the shape on the bottom of the cowls supplied with your 90" P-38 and need to know if they are epoxy glass or poly glass. Thank you.



opjose -> RE: Nitro glass parts composition (2/10/2008 11:30:49 PM)

Is there any easy way to tell the composition apart?

The NP cowls and wheel pants all seem to have the same basic make up as cowls and wheel pants supplied with planes from most other ARF vendors..

e.g. it uses fiberglass and the white resinous material.




ram3500-RCU -> RE: Nitro glass parts composition (2/15/2008 7:28:26 AM)

This is supposed to be a Nitro support thread. Thanks for the quick response to my question Nitro (dripping with sarcasm)!!!!!!!!!!!



Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
0.0625