|
gharm -> RE: black and decker charger? (2/9/2008 11:57:46 PM)
|
Absolutely. It is easy to modify the battery case after carefully removing the cells to provide a plug in pack that wiil allow you to charge a 2 cell pack with the B&d charger. It has been a while since I made one, but I remember that I left the little wire loop that has the temperature sensor taped to the cell pack intact in the case after removing the batteries. I have a JR charge lead coming out through the side of the modified case to plug into the batteries. If you are a little savvy about working with electric stuff, it is pretty straight forward to disassemble the battery pack without damage to the case. A voltmeter will tell you what to connect where.
|
|
|
|
