|
kelloggair -> converting to rocket rc (2/11/2008 3:57:44 PM)
|
hey everybody i might be getting that space ship one model that is a rocket and will try to convert it to rc i think it would be tight and i could be lifted by another plane and launch any suggestions X-Prize - SpaceShipOne Launch Set Estes #1891
Estes - SpaceShipOne Launch Set # 1891 (skill level RTF)
This is a Ready To Fly (RTF) rocket launch set.
Exciting gift / Fantastic Science Fair Project.
You are certain to get the attention of your friends and the science fair judges with this impressive Launch Set.
Purchase includes FREE on-line help from TheRocketman.net
Join the new 'Spaceflight Revolution' and fly a scale replica of SpaceShipOne , the Ten-Million Dollar Ansari X PRIZE Winner .
Designed by Burt Rutan of Scaled Composites. This is the first privately funded, manned spacecraft to reach outer space.
Your model will thunder toward space powered by a hefty 'B' or 'C' engine (sold separately). Then watch it return by parachute to be flown again and again.
Specs:
Length - 13 in. (33 cm)
Rotor span - 6.5 in. (16.5 cm)
Recovery - 12 in. (30 cm) Parachute
Max Altitude - 400 feet
Includes:
13 inch tall model of SpaceShipOne
complete launch system
Requires:
minor assembly
four "AA" alkaline batteries - sold separately.
Estes model rocket engines (B4-2, B6-2, C6-3) not included
|
|
|
|
