What Brushless Motor & ESC TO Use?

What Brushless Motor & ESC TO Use?
View related threads: (in this forum | in all forums)

Logged in as Guest

Users viewing this topic: none

Printable Version

All Forums >> RC Cars, Buggies, Trucks, Tanks and more >> Exceed RC Support - Nitro Cars >> What Brushless Motor & ESC TO Use?

Page: [1]

Login

Message

<< Older Topic Newer Topic >>

What Brushless Motor & ESC TO Use? - 2/12/2008 2:00:25 PM

DustyDoug

Posts: 53
Joined: 1/22/2008
From: Souderton, PA, USA
Status: offline

Andy,
I am looking at the Raien Tech site and would like to purchase a brushless system.
I am not sure what to purchace for my application?
I have an Exceed 1/10 th electric truggy with the wheels from the Exceed electric Monster truck installed.

What do the kv numbers represent in relation to torque vrs. speed?

http://www.raidentech.com/brushlessesc.html

http://www.raidentech.com/inrubrmo.html

Please advise,
Dusty

_____________________________

Happy Motoring!

Post #: 1

RE: What Brushless Motor & ESC TO Use? - 2/13/2008 7:15:33 AM

yadac123

Posts: 642
Joined: 9/17/2005
From: , CA, USA
Status: offline

These ESC are mainly for heli and airplanes and none of them will do it. Car ESC is very different because of the break and higher requirements. Exceed-rc will have brushless system for our electric line soon.

Andy

_____________________________

Andy - Official Exceed RC Support Forum Host

(in reply to DustyDoug)

Post #: 2

RE: What Brushless Motor & ESC TO Use? - 2/13/2008 1:45:11 PM

HimotoRacingUSA

Posts: 12494
Joined: 2/27/2006
From: howard beach, NY, USA
Status: offline

quote:

ORIGINAL: DustyDoug

Andy,
I am looking at the Raien Tech site and would like to purchase a brushless system.
I am not sure what to purchace for my application?
I have an Exceed 1/10 th electric truggy with the wheels from the Exceed electric Monster truck installed.

What do the kv numbers represent in relation to torque vrs. speed?

http://www.raidentech.com/brushlessesc.html

http://www.raidentech.com/inrubrmo.html

Please advise,
Dusty

redcatracing offers and inexpensive great brushless system:
http://www.redcatracing.com/itemdetail_part.asp?partno=kitbrushlessmotor
http://www.clermontmotorsports.com/servlet/the-808/Redcat-Racing-Brushless-setup/Detail

here is a video of it in my redcat tornado epx, i put it in my tsumami truggy too:
http://youtube.com/watch?v=KywosfFnmV0
http://youtube.com/watch?v=bPT0rwsqSjY

_____________________________

OFFICIAL SUPPORT HIMOTORACING.COM / OWNER HIMOTORACINGUSA.COM
***Its me EHROOF!!!!*** THE REVOLUTION HAS BEGUN

(in reply to DustyDoug)

Post #: 3

RE: What Brushless Motor & ESC TO Use? - 2/13/2008 3:21:23 PM

DustyDoug

Posts: 53
Joined: 1/22/2008
From: Souderton, PA, USA
Status: offline

Thanks for the info guy's. I decided to go with the Red Cat set up, you guys seem to have it together pretty well and the system is put together to work with my vehicle, I hope...

Again, what do the kv numbers represent in relation to torque vrs. speed?
What did I buy? How many kv is the Red Cat motor and how many amps can the ESC handle?
There is not a lot of info offered when ordering, I just want to know more about the brushless systems.

Hay Red Cat support, did my order ship? I ordered yesterday and am hoping to have my brushless set up Thursday (2nd day air), I'm leaving for a trip Friday afternoon and wanted to get a test run in before I go.

My Order ID: 86598

Thanks,
Dusty

_____________________________

Happy Motoring!

(in reply to HimotoRacingUSA)

Post #: 4

RE: What Brushless Motor & ESC TO Use? - 2/14/2008 3:22:45 AM

KingOr28

Posts: 75
Joined: 11/10/2007
From: , TX, USA
Status: offline

Do you use the stock AM Transmitter that comes with the Exceed RC Truck? If so let me know how that brushless system you are getting ends up working out for you.

(in reply to DustyDoug)

Post #: 5

RE: What Brushless Motor & ESC TO Use? - 3/28/2008 7:44:52 PM

tokenring

Posts: 304
Joined: 11/27/2007
From: Burlington, ON, CANADA
Status: offline

are the brushless setups from Exceed ready yet or in the near future. Andy had told me to wait it out a bit (2 months ago) and now it's getting warm so whats up?? If Exceed doesn't have the brushless setup soon, I'm getting RedCat's version... as I already have all of the documentation.

AB

_____________________________

*** Eclectic Powered Trucks ***

(in reply to KingOr28)

Post #: 6

RE: What Brushless Motor & ESC TO Use? - 3/29/2008 4:45:59 AM

DonnyNitro

Posts: 1043
Joined: 10/28/2007
From: guelph, ON, CANADA
Status: offline

quote:

ORIGINAL: ehroof

quote:

ORIGINAL: DustyDoug

Andy,
I am looking at the Raien Tech site and would like to purchase a brushless system.
I am not sure what to purchace for my application?
I have an Exceed 1/10 th electric truggy with the wheels from the Exceed electric Monster truck installed.

What do the kv numbers represent in relation to torque vrs. speed?

http://www.raidentech.com/brushlessesc.html

http://www.raidentech.com/inrubrmo.html

Please advise,
Dusty

redcatracing offers and inexpensive great brushless system:
http://www.redcatracing.com/itemdetail_part.asp?partno=kitbrushlessmotor
http://www.clermontmotorsports.com/servlet/the-808/Redcat-Racing-Brushless-setup/Detail

here is a video of it in my redcat tornado epx, i put it in my tsumami truggy too:
http://youtube.com/watch?v=KywosfFnmV0
http://youtube.com/watch?v=bPT0rwsqSjY

videos removed bro????

_____________________________

I Love the Smell of Nitro Exhaust in the Morning.....It Smells Like.............Victory.

(in reply to HimotoRacingUSA)

Post #: 7

RE: What Brushless Motor & ESC TO Use? - 5/1/2008 5:53:41 AM

bhcvc

Posts: 126
Joined: 12/20/2002
From: Los Angeles, CA, USA
Status: offline

Any update on Exceed's BL setup?

(in reply to DonnyNitro)

Post #: 8

RE: What Brushless Motor & ESC TO Use? - 5/2/2008 7:47:34 PM

yadac123

Posts: 642
Joined: 9/17/2005
From: , CA, USA
Status: offline

Sorry the brushless system is still undergo testing and not out yet.

Andy

_____________________________

Andy - Official Exceed RC Support Forum Host

(in reply to bhcvc)

Post #: 9

RE: What Brushless Motor & ESC TO Use? - 5/7/2008 8:58:24 PM

AllAboutFunHobbies

Posts: 2557
Joined: 12/5/2006
From: , TX, USA
Status: offline

Ya know the traxxas brushless sytem will work also and many other systems like the Team Associated systems as well as some of the novack systems.

_____________________________

Dealer for...Redcat Racing, Traxxas, Team Associated, Cen, Racers Edge, RD Logic, Bodies by Blue, HPI, Himoto USA.....etc

(in reply to yadac123)

Post #: 10

RE: What Brushless Motor & ESC TO Use? - 5/12/2008 2:37:35 AM

yadac123

Posts: 642
Joined: 9/17/2005
From: , CA, USA
Status: offline

We have the brushless system ready http://www.nitrorcx.com/ezrun-brushless-combo-set.html it's works under exceed-rc electric on-road car and off road buggy.

Andy

_____________________________

Andy - Official Exceed RC Support Forum Host

(in reply to AllAboutFunHobbies)

Post #: 11

RE: What Brushless Motor & ESC TO Use? - 5/15/2008 6:47:37 AM

bhcvc

Posts: 126
Joined: 12/20/2002
From: Los Angeles, CA, USA
Status: offline

Andy - will that Exceed BL system work on the Dynamite 4WD truck?

(in reply to yadac123)

Post #: 12

RE: What Brushless Motor & ESC TO Use? - 5/16/2008 3:02:28 AM

yadac123

Posts: 642
Joined: 9/17/2005
From: , CA, USA
Status: offline

Sorry this system only works on buggy and on-road cars.

Andy

_____________________________

Andy - Official Exceed RC Support Forum Host

(in reply to bhcvc)

Post #: 13

RE: What Brushless Motor & ESC TO Use? - 5/16/2008 5:34:23 AM

bhcvc

Posts: 126
Joined: 12/20/2002
From: Los Angeles, CA, USA
Status: offline

Andy - any plans to develop a BL system for the 4WD trucks? Redcat's BL setup works on 4WD trucks.

(in reply to yadac123)

Post #: 14

RE: What Brushless Motor & ESC TO Use? - 5/16/2008 5:44:49 AM