Walkera 703 digital transmitter please read (Full Version)

All Forums >> [RC Helicopters] >> Electric RC Helis >> Walkera Helis - Dragonfly, etc..



Message

polecat16 -> Walkera 703 digital transmitter please read (2/21/2008 11:28:45 PM)

--------------------------------------------------------------------------------

I just recieved this Transmitter From Ebay for $56 with a 702 Reciever and it is a Pretty good computer Radio for little money !
I wondered if people would like to share there experience with it and which models they can get to work with it .
So far i have found:
Walkera 4#3 at first would not arm but found settings in the 4#3 thread
Now Flys So much better than the Squirel type flight with the original one !
Walkera 52 rx601= no issues worked streight away
Walkera 35C pro 701 Rx not tried yet
Walkera 36 with wk-701 not tried yet
walkera 64C with rx 704 not tried yet
walkera 22E with rx603 will not arm
Walkera 5#6 with rx408 will only work if I initiate with 405 transmitter??

So far I have been trying to set up all my helis to work from one controller and have a feeling it does not like "old"style walkera xtals but setup has been easy to follow and menus logical .

The Aim of this thread is just to gather information and discuss work arounds for anyone interested in this little Transmitter
Also if you can share your settings for particular helis you have got to FLy well I would be VERY Grateful :)



ircu -> RE: Walkera 703 digital transmitter please read (4/23/2008 5:41:00 AM)

I'm newbie. Could you please post the settings for different helis? Like, TX703 to RX601 with each MODEL settings, swash type etc. Or, TX703 to E-sky Lama settings (if possible). Thanks!



Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
0.09375