HELP!!! lipo cutoffs????????? (Full Version)

All Forums >> [Radios, Batteries, Clubhouse and more] >> Batteries & Chargers >> MaxAmps Support



Message


duckscrubber -> HELP!!! lipo cutoffs????????? (2/23/2008 2:57:24 PM)

I am interested in purchasing the smart stop lipo cutoff by Team Novak. However I am unsure of which one to purchase? I have the new 16.8v Traxxas E-Maxx with two Maxamps 6000mah 2s 7.2v lipos. My question is do I need 2 of the 2s smart stops?, And if so how do I connect them both between the reciever and ESC? Or do I need just 1 ofe the 4s Smartstop cutoff's? Please Help!!




JAM MaxAmps -> RE: HELP!!! lipo cutoffs????????? (2/23/2008 3:00:10 PM)

Get one for a 2S pack and connect it to the pack that supplies the servo's as well as the motor that will be the one to drain first.

Jason




duckscrubber -> RE: HELP!!! lipo cutoffs????????? (2/27/2008 9:29:39 PM)

Thanks Jason!!!

Does this apply only if the batteries have an exact charge? What do I need to do to completely protect the batteries against a low voltage state?




JAM MaxAmps -> RE: HELP!!! lipo cutoffs????????? (2/27/2008 10:01:19 PM)

You need to keep charging the packs the same amount of times and always use them only after they have both been charged this will ensure that you always hit a safe LVC point. Never run the rig with one pack half discharged and the other full.

Jason




Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
0.078125