Transmitter pack for Spektrum systems (Full Version)

All Forums >> [Radios, Batteries, Clubhouse and more] >> Batteries & Chargers >> MaxAmps Support



Message

brushless -> Transmitter pack for Spektrum systems (2/26/2008 7:14:32 PM)

Does Maxamps make anything that will work in the Spektrum DX2 or DX3 systems? How about the DX3R system?



JAM MaxAmps -> RE: Transmitter pack for Spektrum systems (2/26/2008 7:43:02 PM)

Li-Po or Nimh?

Jason



brushless -> RE: Transmitter pack for Spektrum systems (2/26/2008 8:43:28 PM)

LiPo.



JAM MaxAmps -> RE: Transmitter pack for Spektrum systems (2/26/2008 8:48:57 PM)

http://www.maxamps.com/TXB25003-FU.htm this is wjhat I use in my DX3. But you need to solder a set of leads to the back of the stock battry holder connectors. Put on a Micro Deans Connector and then a Micro Deans on the Li-Po Transmitter pack. takes about 10 minutes to do this and they work great plus you can still use the original battery rack if need be.

Jason



Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
0.15625