Balanceing lead (Full Version)

All Forums >> [Radios, Batteries, Clubhouse and more] >> Batteries & Chargers >> A123Racing Support



Message

Delta Mike -> Balanceing lead (2/29/2008 9:24:06 PM)

Dear A123,

I have a3 cell 2300 ma pack. I want to make an extension for the ballanceing lead. I notice the 3 cell pack has 2 wires Orange and white. What is recommended for an adapter plug? Can these be tied off together into one wire?? Please advise.

Thanks, Dennis



PwndByMustang -> RE: Balanceing lead (3/1/2008 3:34:55 PM)

here is the developer kit wiring http://a123racing.com/Instructions/PT400111.pdf and the connector is basically a servo connector with a clip on it. if you want the clip ones go here http://a123racing.com/html/rcdevkits.html to get the balance cable already made. Or you can build the connectors by buying these connectors and the female pins which are available from alliedelec.com and other electronics stores. I hope this helped!



Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
0.0625