Power Expander and Kodiak SW (Full Version)

All Forums >> [Radios, Batteries, Clubhouse and more] >> RC Radios, Transmitters, Receivers, Servos, gyros >> Radio Manufacturer Direct Support >> Smart-Fly (Quest Engineering) Support Forum



Message

sashley -> Power Expander and Kodiak SW (3/4/2008 8:21:54 PM)

I plan on using a Power Expenadre Pro with A123 batteries ( pair of the 2300 ) between the batteries and the Power Expender will be a Kodiak Switch( Fromeco) for charging and MA usage indication.


Question 1- Can or do I still need to use a fail -Safe switch attached to the Power Expander

Question 2- will charging from this switch creat a problem with the power expender.



rrritchey -> RE: Power Expander and Kodiak SW (3/4/2008 8:38:58 PM)

Hi,
1) The Kodiak switches power on and off. You do not need another switch on the PowerExpander.
2) It shouldn't. Do you have a particular concern. I am not that familiar with the Kodiak switch.



Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
0.046875