Eclipse 7 and Elevon Dual Rates ?

Eclipse 7 and Elevon Dual Rates ? (Full Version)

All Forums >> [Radios, Batteries, Clubhouse and more] >> RC Radios, Transmitters, Receivers, Servos, gyros >> Radio Manufacturer Direct Support >> Hitec/MultiPlex Radios- Ask Hitec Customer Service

Message

440GTX -> Eclipse 7 and Elevon Dual Rates ? (3/13/2008 1:37:05 PM)
How do you adjust/set the elevon dual rates on an Eclipe 7 ? The D/R toggle on the elevator and aileron seems to not change the throws. Thanks in advance.

MikeMayberry -> RE: Eclipse 7 and Elevon Dual Rates ? (3/13/2008 6:13:22 PM)
Go into the DR setting in the menu and set the travel in each switch position. I typically set 100% for the high rate (switch up) and 65% for the low (switch down.) Then I turn on the flight condition #3 and set everything to 125% for a 3D or "Max" rate. Again... everything is set in the DR menu and sets the rate according to the switch position or flight condition. The same goes for expo. Mike.

Page: [1]

SITE MAP! : : FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.

0.0625