HFD-08RD Problem

HFD-08RD Problem (Full Version)

All Forums >> [Radios, Batteries, Clubhouse and more] >> RC Radios, Transmitters, Receivers, Servos, gyros >> Radio Manufacturer Direct Support >> Hitec/MultiPlex Radios- Ask Hitec Customer Service

Message

mpaczyns -> HFD-08RD Problem (3/19/2008 1:54:01 AM)
I a new to the hobby and attempting to build my first Extra 300s. I am having problems with getting the reciever to operate both ailerons. Do each go into a different slot on the reviever, or do I have to mount both in the same slot with some kind of 2 into 1 wire? I can get one to operate great in the channel 5 slot. Mark

MikeMayberry -> RE: HFD-08RD Problem (3/19/2008 7:19:42 PM)
Mark, It all depends on your transmitter... If it is a multi channel computer radio then it will have mixing to handle the dual ailerons; this is typically the aileron differential or flapperon setting in which you will use channels #1 and another depending on the radio for the second servo. If your radio does not have mixing then you will need to use a Y harness to link the two servos to the aileron channel. Mike. Note: Please be aware this forum in for interaction between Hitec reps only. Please use PM if you want to offer advice to help.

Page: [1]

0.0625