ADJ REGULATOR? (Full Version)

All Forums >> [Radios, Batteries, Clubhouse and more] >> RC Radios, Transmitters, Receivers, Servos, gyros >> Radio Manufacturer Direct Support >> Smart-Fly (Quest Engineering) Support Forum



Message


YORAM1955 -> ADJ REGULATOR? (3/20/2008 11:41:52 PM)

I received a Smart-Fly product called ADJ REGULATOR. I got it without any instructions. It is a board packed in a yellow heat shrink, with a heatsink, and 4 cables, a 2 wires with a frmal connector, a 3 wire with a female connector, a 2 wire with male connector and a 3 wire with a male connector. On the side of the unit there is a 3 pins connector. The label says " Smart-Fly - Adj Regulator - Vin<13V Vout 5.2-6.7V - 12 Watts Revision F".
What is the function of the unit ? (Iguess a regulator), what are all the cables for? what is the side connector for? where can I find instructions for this unit?
Thanks
Yoram




rrritchey -> RE: ADJ REGULATOR? (3/20/2008 11:48:56 PM)

Hi Yoram.
Its and adjustable regulator that supports a failsafe switch. E-mail us at info@smart-fly.com and we cam e-mail you the instructions.




YORAM1955 -> RE: ADJ REGULATOR? (3/20/2008 11:58:37 PM)

Just did, 7 minutes and 4 seconds, the fastest response I ever got on any support issue from any vendor.
Thanks
Yoram




Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
0.0625