parts for cmp corsair 50 (Full Version)

All Forums >> [RC Airplanes] >> ARF or RTF >> NitroModels Support

Message

---

rcflyercrisman -> parts for cmp corsair 50 (3/24/2008 10:04:54 PM) i need a replacement cowl and dummy engine for my cmp 40-50 sized corsair and also would like to know if there is a eletric conversion for this plane thanks

---

nitrostaff1 -> RE: parts for cmp corsair 50 (3/25/2008 1:24:32 AM) I can look up a cowl to you but we do not have dummy engine. what's your order number? John Nitro Planes

---

opjose -> RE: parts for cmp corsair 50 (3/25/2008 4:40:43 PM) There are many ways to do the dummy engine... If you want something impeccable, check out Williams Brothers. Otherwise just measure the opening and you can purchase good looking ones from Frank Tatiano, or other manufacturers with the same dimensions. If all else fails, grab a photo off the net, print it on a color printer to size. Glue it on ply, cut to shape, then fuel proof/coat it. Cut any vents, and install. This works surprizingly well.

---

rcflyercrisman -> RE: parts for cmp corsair 50 (3/25/2008 7:41:52 PM) i had not thought of the photo idea thanks and thanks again for the contacts and fast response

---

Page: [1] 1

SITE MAP!   : :   FORUM RULES © 2001 - 2007 24-7 RC, LLC, all rights reserved.

9.277344E-02