Nelson Muffler Adhesive??? (Full Version)

All Forums >> [RC Airplanes] >> [Pylon Universe - RC Pylon Racing] >> General Racing Discussion



Message

YUKONFLYR -> Nelson Muffler Adhesive??? (3/26/2008 8:00:38 AM)

Have a Nelson Muffler with a loose outer can. Finally got it off by heating it up with a torch.

I am planning on using Permatex sleeve retainer which is good to 400 deg f unless there is a more suitable adhesive?

What do you guys use to on the threads of the outer can?

Thanks

Richard



Conrod -> RE: Nelson Muffler Adhesive??? (3/26/2008 9:58:33 AM)

Hi
I use Loctite 620 Retaining compound, with primer. Recomended to me by Dave Shadel.

Geoff



djlyon -> RE: Nelson Muffler Adhesive??? (3/26/2008 5:09:04 PM)

I just clean up the threads and use blue loctite.

Denis



YUKONFLYR -> RE: Nelson Muffler Adhesive??? (3/26/2008 11:23:46 PM)


quote:

ORIGINAL: Conrod

Hi
I use Loctite 620 Retaining compound, with primer. Recomended to me by Dave Shadel.

Geoff


I have the locktite 620, not sure about the primer, does it have a number?

Thanks

Richard



Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
9.179688E-02