Brushless Motor Attachment Screws (Full Version)

All Forums >> [RC Helicopters] >> Electric RC Helis



Message

cactus hopper -> Brushless Motor Attachment Screws (3/31/2008 11:04:48 PM)

The ones that they provide the screws for and don't fit any motor mounts are 3MM 50 pitch. Anybody know what the other two, the ones that fit the motor mount holes are?



gnd2 -> RE: Brushless Motor Attachment Screws (3/31/2008 11:48:16 PM)

Might help if you told us what motor and heli you're talking about.



cactus hopper -> RE: Brushless Motor Attachment Screws (3/31/2008 11:58:52 PM)

Take your pick

Motors
Scorpion HK 2221-8
Scorpion HK 2208-24
Z-Power ACE 450
Z-Power GT 450
HDX 3800

Helis
Microheli Advanced Pro Frame
CopterX 450
EXI
Belt CP
King V2








gnd2 -> RE: Brushless Motor Attachment Screws (4/1/2008 12:41:32 AM)

Hmm, well I don't know any of those specifically, but if you're suggesting that all the 400/450 size stuff is the same then I'll throw this out there: For the Align 430 motors the other one is M2.6x6mm. Sorry I don't know the pitch, but would think it's a good bet they're the same as the M3x6mm.



cactus hopper -> RE: Brushless Motor Attachment Screws (4/1/2008 12:59:51 AM)

Thanks, that's the only size you can't buy anywhere so that must be what it is.



gnd2 -> RE: Brushless Motor Attachment Screws (4/1/2008 9:24:38 AM)

You might want to double check with helidirect and see if these are the right ones:
http://www.helidirect.com/product_info.php?products_id=6600

They're labeled as 2.5mm but maybe there's a mixup somewhere.

These might work, look like the same thing:
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXDLN4&P=7

I've got a couple extra pairs (one hex and one philips). I could part with a pair if you want them. I'll send you my fubar'd 430L motor also if you're interested [:)]



cactus hopper -> RE: Brushless Motor Attachment Screws (4/1/2008 6:52:49 PM)

Nope, 2.5MM won't fit. I found some at a local hardware store. SAE 3-48 is really close but they have to be 2.6. Thanks for your offer but Duratrax uses them on their R/C cars. There are a lot of car oriented hobbys shops here, I'll try them. Interesting side note. Esky uses 3MM for all four motor mount holes.



Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
0.234375