transmitter tray (Full Version)

All Forums >> [Radios, Batteries, Clubhouse and more] >> Unusual R/C >> R/C Sky Diving



Message

goldenknight1 -> transmitter tray (4/9/2008 8:31:12 PM)

this is goldenknight1
Does anyone have plans for a transmitter tray that I could make it. I tried one and it is a lot easer to conteol the jumper when ypu do not have to hold onto tranamitter



BOB
fair winds and blue skies



Lightfoot -> RE: transmitter tray (4/10/2008 1:10:36 AM)

There are plans for a transmitter tray on my web page.



goldenknight1 -> RE: transmitter tray (4/10/2008 3:19:59 AM)

Howard :
Thank you for the links and I really like the one you have so with your approval will copy the plans and build one.




Bob
Again Thank You



Lightfoot -> RE: transmitter tray (4/10/2008 3:49:04 AM)

You can download the whole article in .doc or .pdf format and print it out. You are welcome to distribute it if you want.



goldenknight1 -> RE: transmitter tray (4/11/2008 4:24:43 AM)

Howard:

I have finished trnamitter tray from your drawings , I did not use plywood I had some grey smoked quarter inch lexan , and have the whole tray together and will send you pictures of it . it is a ral nice light tray and I really like your design on hand rests.



Bob
fair winds and blue skies



goldenknight1 -> RE: transmitter tray (4/19/2008 2:15:26 AM)

lightfoot : here are a couple of pictures of tray I built from your plans



Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
0.09375