JR 7202 settings (Full Version)

All Forums >> [Radios, Batteries, Clubhouse and more] >> RC Radios, Transmitters, Receivers, Servos, gyros >> Radio Manufacturer Direct Support

Message

---

old n slow -> JR 7202 settings (4/15/2008 7:34:00 PM) Looking at the JR7202 and have a question. If I get to the field and my current frequency is being used and I change the frequency on my xmtr and rcvr will all the setting for the plane be retained at the new frequency or will it be necessary to retim the model?

---

Troy Newman -> RE: JR 7202 settings (4/22/2008 6:01:11 AM) all the programming will remain the same. You do need to range check on the new frequency. This is always a good practice when changing frequencies or anything to do with the RF of your system. New RX, new crystals if the RX has a crystal in it. New antenna routing in the model........those types of things. But simply changing frequencies will not affect end point adjustments, trims, or programming associated with the model. Just its frequency. Troy Newman Team JR

---

Page: [1] 1

SITE MAP!   : :   FORUM RULES © 2001 - 2007 24-7 RC, LLC, all rights reserved.

0.046875