Electric motor weights (Full Version)

All Forums >> [Electric Aircraft Universe] >> Electric Pattern Aircraft



Message

Paul_K -> Electric motor weights (4/16/2008 9:15:11 AM)

It seems to me that the stated weights as seen on the various webshops is the weight of the bare motor without necessary hardware for mounting and propeller adapters.
For example my Dualsky XM6360CA-11T is given as 618g by dealers, but when the backmount and propeller adapter is mounted the weight is 655g.

I''m particularly interested in the usable weight of the AXI 5330/F3A. The manufacturers stated weight is 652g. What is the weight with the backmount and the propeller adapter?

These weights would be of interest for all the motors commonly used in F3A like the Plettenberg, Cyclone and of course the Hackers. Anyone care to join in?



f3a05 -> RE: Electric motor weights (4/16/2008 10:31:27 AM)

Here''s my AXi F3A, with a Dualsky back "X" mount(and the brass Dualsky collet-the Axi collet is too big), and the optional (smaller,8mm) prop adapter.

[URL=http://imageshack.us][IMG]http://img238.imageshack.us/img238/2462/img0792ug5.jpg[/IMG][/URL]

710 grams.....



can773 -> RE: Electric motor weights (4/16/2008 2:15:57 PM)

The Plett 30-10 Evo is about 585 grams with the prop adapter. No extra mounting hardware is required since its built into the motor.



can773 -> RE: Electric motor weights (4/16/2008 3:02:08 PM)

Also, there was this post some time ago. Not sure how current all the weights are, the Pletty Evo changed since that picture was taken. The weight I gave above is of a brand new motor that I got only a couple of months ago.

http://www.rcuniverse.com/forum/fb.asp?m=5169041



Paul_K -> RE: Electric motor weights (4/16/2008 3:39:09 PM)


quote:

ORIGINAL: can773

Also, there was this post some time ago. Not sure how current all the weights are, the Pletty Evo changed since that picture was taken. The weight I gave above is of a brand new motor that I got only a couple of months ago.

http://www.rcuniverse.com/forum/fb.asp?m=5169041


Chad: Thank you for directing me to that thread. Lot''s of usefull info there.

Paul



Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
0.09375