|
A.T. -> RE: ECLIPSE 7 (4/21/2008 12:45:12 AM)
|
quote:
ORIGINAL: Command Central I just bought a used Eclipse 7 in VG condition. I find that throttle trim does not move the servo arm. EPA for high and low end and throttle cut works fine.
What am I doing wrong? Thanks, Roy
Does the trim work with throttle lever in lowest position? Similar to all other known computer transmitters, the throttle trim works betwen 0 - 50% of travel only. Please refer page 8 of the manual "Note that the CH3 trim only moves downward, so if you need more engine RPM, set up idle with the trim at -25% so you can increase it if needed."
Download .pdf Manual and addendum from
Eclipse features
Regards
Alan T.
Alan's Hobby, Model & RC FAQ Web Links
|
|
|
|
