Posts: 58
Joined: 2/15/2004 From: Lusby, MD, USA Status: offline
I just wanted to let all other giant scale flyers know about a new company that is selling some really great planes. Here is their website: http://www.tmmy.pantown.com
The 35% scale Cessna 182 Skylane ARF is VERY complete. Just drop your radio & engine in, charge your batteries, & go fly. It includes the following features: Construction: • All composite & fiberglass. • The fuselage has the entire framework preinstalled. • The cowling, wings, ailerons, flaps, stabilizers, elevators, and rudder are finished & with pre-painted in white & have scale panel lines & rivets molded in. • Windows and doors are pre-assembled on to the fuselage & the doors are functional. • Wings halves are detachable & slide on via wing tube. • Ailerons, Flaps, Elevator, and Rudder come hinged. • Bulkhead and landing gear mount is preinstalled. • Prefabricated kit includes a complete accessory package.
• Specifications: o Scale: 35% o Wingspan: 158” (4.00 meters) o Wing area: 1700 square inches o Length: 106” (2.70 meters) o Ready to fly weight 44lbs-55lbs (20-25 kg) o Radio: 5 Channel, 8 servos o Recommended engine: 100-150 cc gas engine o If you want to fly electric us the HackerBrushless A150 or A200 outrunner motors which are equal to 100cc & 150cc respectively. http://www.aero-model.com/motorlist.aspx?id=A100/200 You can also use the Big Boss outrunner motor available from Horizon Hobby. The Big Boss includes a 300 amp speed controller. http://www.horizonhobby.com/Products/Default.aspx?ProdID=CYLBB
• The ARF includes: o Pre-built fuselage, wings, and tail assemblies o Wing tube o Push rods o Servo mounts o Nose gear strut & alloy main gear o Wheels o A complete preinstalled cockpit interior o 50oz (1.5 L) fuel tank o Canopy o Spinner o Wheel pants o Wing struts o Pre installed nav lights & landing lights
Here are some pics of the Cessna:
< Message edited by slevin1 -- 5/31/2008 12:22:49 AM >
Posts: 5060
Joined: 7/3/2003 From: newton,
NC, USA Status: offline
Very nice looking models, I especially liked the Gooney Bird. One thing I don't understand, about either of them. As much attention as was obviously spent on scale detail, why did they make the wings flat? (no dihedral). The C182 has about 2-1/2 degrees, and the C-47 about 6 or so. The models would sure be more stable with the scale dihedral.
_____________________________
Club Saito #2, WACO Brotherhood #20. What other trouble can I get into?
Posts: 58
Joined: 2/15/2004 From: Lusby, MD, USA Status: offline
Looks pretty scale in the pics. By the way, they are looking for a US distributor so if anyone is interested, e-mail them with attention to Tommy the owner. TMMY can still ship to the US though.
Posts: 5060
Joined: 7/3/2003 From: newton,
NC, USA Status: offline
It is a good looking plane. You don't get a sense of just how big the thing is until you see someone next to it. As to my earlier post on dihedral There are a few pics that show it the way it should be, but also some showing the plane with none at all. Maybe it's camera angle. Fine looking models.
_____________________________
Club Saito #2, WACO Brotherhood #20. What other trouble can I get into?
Hi- The C-47 in RNAF colors on Tommy's webpages is mine, and I also had his 1/5 Cessna. Both are very stable flyers, no problem. A slightly increased wingspan and washout at the wing tips compared to scale account for this. Best rgds Richard B. Oslo
quote:
ORIGINAL: khodges
Very nice looking models, I especially liked the Gooney Bird. One thing I don't understand, about either of them. As much attention as was obviously spent on scale detail, why did they make the wings flat? (no dihedral). The C182 has about 2-1/2 degrees, and the C-47 about 6 or so. The models would sure be more stable with the scale dihedral.
_____________________________
Manager of RC-Flight.com as, Scandinavia dealer for JetLegend, ESM and other rc model products.
Posts: 219
Joined: 4/6/2006 From: LeonoraWestern Australia, AUSTRALIA Status: online
Wow, that is a very nice model. I have emailed the company with regards to purchasing one of these, and will post up the cost of the purchase and shipping to Australia.