Sig Four Star 40 Dihedral Brace (Full Version)

All Forums >> [RC Airplanes] >> Kit Building >> Kit Manufacturer Direct Support Forum



Message


bjmjs -> Sig Four Star 40 Dihedral Brace (4/27/2008 2:18:02 AM)

I lost my dihedral brace & don't have the plans. What do I do?




datsun72 -> RE: Sig Four Star 40 Dihedral Brace (4/27/2008 3:14:05 AM)

if your a flier above beginner and and able to fly all four channels then i would recommend
no Dihedral ,build it a stright wing . the plane is stable as is but with no Dihedral this will allow you more roll control and the op to fly more acro manuvers. the main thing with the wing is to make sure you have NO TWIST in it .i have built more replacement wing for others and if you over power the plane or plan to do high G's put shear web's on both sides of spar. the 4* is a great plane but has a few bugs in it . i have many in dif forms of this plane and the mid star.
anthony@customcraftedrc P.S if you need some i can make you some or i can send you via email the part you can print out and cut your own.




Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
0.109375