A little help needed (Full Version)

All Forums >> [Glow Engines, Gas Engines, Fuel & Mfg Support Forums] >> Glow Engines



Message

twostroke -> A little help needed (4/29/2008 4:03:23 AM)

I broke the throttle arm off my carb on a older OS 40 fp and need to know what carb it is so I can order a new one for it, I hope someone out there still has a parts break down for this engine and where I can get one. Thanks.........Twostroke.



rainedave -> RE: A little help needed (4/29/2008 4:49:43 AM)

Tower lists the #3A as the 40FP carb. They still have some parts in stock, including the throttle arm:

http://www3.towerhobbies.com/cgi-bin/wti0005p?&I=OSMG2532&P=X

David



rcdude7 -> RE: A little help needed (4/29/2008 5:22:07 AM)

The Tower .40 was a FP clone so many of the parts can be used on the FP. The parts are much less expensive.

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXJB40&P=M



twostroke -> RE: A little help needed (4/29/2008 6:12:01 AM)

Thanks guys!!



Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
9.301758E-02