DX6,GY401 and gain, help please....  
View related threads: (in this forum | in all forums)

Tower Hobbies
Enter up to 4 keywords or Tower stock numbers
Logged in as Guest



Users viewing this topic: none
  Printable Version
       

All Forums >> RC Helicopters >> RC Helicopter General Discussions >> DX6,GY401 and gain, help please....
Page: [1]

Login
Message << Older Topic   Newer Topic >>
DX6,GY401 and gain, help please.... - 5/2/2008 9:41:20 AM   
FlyingHigh 400


 

Posts: 672
Joined: 11/1/2007
From: St Clair Shores, MI, USA
Status: online 		I just finished all my settings but im lost on how to get to the gain settings for my gyro.How do I get to the settings for the gyro gain?I know I have to re-bind after turning the gain up or down but I cant find the settings to do that.I know my hitec gyro gain was at 72% and never had tail wag .How do I get the gyro gain at 72% with the DX6?

I have it set like the manual says (aileron D/R switch) but how do I adjust it?

< Message edited by FlyingHigh 400 -- 5/2/2008 9:49:16 AM >

_____________________________

Raptor 30,GY401/JR NES810G,OS.37/Revolution tune Pipe. http://www.youtube.com/user/flyinhigh450
       Post #: 1

RE: DX6,GY401 and gain, help please.... - 5/2/2008 12:48:34 PM   
planepounder


 

Posts: 333
Joined: 12/14/2006
From: , GA, USA
Status: offline 		hey I have a DX6i, and the gyro is off the flap switch, if you assign the aileron d/r to gyro, what do you do about the alieron rates? On the 6i you use the flap switch. The 6i is a snap to set up on gyro, I thought the 6 would be similar. On the 6i the gyro adjust is inhibited until you enable it is the 6 the same? if so have you enabled it?

(in reply to FlyingHigh 400)
       Post #: 2

RE: DX6,GY401 and gain, help please.... - 5/2/2008 1:18:08 PM   
Skarn


 

Posts: 558
Joined: 1/1/2007
From: Pasadena, MD, USA
Status: offline 		Hey bro,

It depends on what channel you have setup for your gyro. Did you assign the GEAR > GEAR or GEAR > GYRO?

If you did the GEAR > GEAR you use your gear channel ATVs (end points) to set the gain. Anything over 50% is HH mode, under 50% is rate

If you did the GEAR > GYRO, you will have a new menu in the radio called gyro sense. Set that to F.MODE Auto. Then you will be able to program gain for both ST0: ST1:
Set the gain to 72% as a starting point....I did as per the Finless vids and haven't ever had to change it.

Remember, anything over 50% is HH mode, under 50% is rate.

Good luck!
Skarn

(in reply to planepounder)
       Post #: 3

RE: DX6,GY401 and gain, help please.... - 5/2/2008 10:38:36 PM   
FlyingHigh 400


 

Posts: 672
Joined: 11/1/2007
From: St Clair Shores, MI, USA
Status: online 		Thanks for the help,but im still lost lol.It took me about 1 week to learn how to set my Hitec eclipse 7 up and it really helped with setting the DX6 up but im soooo lost on setting the gyro up so I can change the gain.I didnt think finless had a video on setting the DX6 up so im hunting it down now...



quote:

ORIGINAL: Skarn

Hey bro,

It depends on what channel you have setup for your gyro. Did you assign the GEAR > GEAR or GEAR > GYRO?

If you did the GEAR > GEAR you use your gear channel ATVs (end points) to set the gain. Anything over 50% is HH mode, under 50% is rate

If you did the GEAR > GYRO, you will have a new menu in the radio called gyro sense. Set that to F.MODE Auto. Then you will be able to program gain for both ST0: ST1:
Set the gain to 72% as a starting point....I did as per the Finless vids and haven't ever had to change it.

Remember, anything over 50% is HH mode, under 50% is rate.

Good luck!
Skarn



_____________________________

Raptor 30,GY401/JR NES810G,OS.37/Revolution tune Pipe. http://www.youtube.com/user/flyinhigh450

(in reply to Skarn)
       Post #: 4

RE: DX6,GY401 and gain, help please.... - 5/10/2008 1:04:30 AM   
noobflyer01


 

Posts: 703
Joined: 2/17/2008
From: , FL, USA
Status: offline 		hey guys i have the dx6. the GER is at +65%. when i fly in normal mode it is fine. when i flip the idle up switch the tail wags alot. when i checked the tx to see what value is the GER in idle up and it is at -100%. how do i adjust it to make the tail steady in idle up? i'm using the gy401 with the futuba 9650 tail servo.

_____________________________

EF mash rescue Co-ax, HBK2, HBFP, Belt CP, Blackhawk 450, EXI 450, trex 450 SA, mars 480, mini titan e325

(in reply to FlyingHigh 400)
       Post #: 5

Page:   [1]
All Forums >> RC Helicopters >> RC Helicopter General Discussions >> DX6,GY401 and gain, help please....
Page: [1]





Jump to:


Google 



Search | Marketplace | Event Calendar | Local Clubs | Magazine | Product Ratings | New Products | Discussion Forums

Photo Gallery | Member Video Posts | RCU Video Gallery | Instructor Search | Field|Track|Marina Search

Advertisers | Hobby Vendor Resources | Rate Manufacturers | Sign In/Sign Up

SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.

Charities we support that also need your help
Yorkie Rescue | Humane Society | ASPCA | Crohn's-Colitis America

Kaango.com Classifieds

0.422RCU1