Pattern plane repair (Full Version)

All Forums >> [RC Airplanes] >> Crash & Rebuild

Message

---

mjfrederick -> Pattern plane repair (5/2/2008 9:51:54 PM) After my Genesis did a near full-power nose dive into the base of a tree (reducing it to splinters), a buddy of mine gave me this airframe that required some repair. I've been posting the progress in the pattern forum, but I thought people that hang around in this forum might appreciate it too. Here's a link: Quest Repairs

---

mjfrederick -> RE: Pattern plane repair (5/5/2008 3:40:57 AM) Got a lot of work done this weekend. Most of the shaping is done on the nose, installed the new floor in the pipe tunnel, repaired the firewall and replaced 2 stripped blind nuts for the engine mount, installed the gear mount box, and installed all the mounting points for the belly pan, and mounted the landing gear.

---

mjfrederick -> RE: Pattern plane repair (5/14/2008 5:52:51 PM) After looking at the pics, we realized that the ply ring on the nose was way off on the angle, so I got an engine temporarily mounted and re-worked the nose.

---

mjfrederick -> RE: Pattern plane repair (6/1/2008 5:07:41 PM) Got some more work done finally... moving to glass and paint very soon.

---

MetallicaJunkie -> RE: Pattern plane repair (6/3/2008 4:53:34 AM) wow its looking good.....

---

Page: [1] 1

SITE MAP!   : :   FORUM RULES © 2001 - 2007 24-7 RC, LLC, all rights reserved.

0.125