Opinions on Gearing : TT-01

Opinions on Gearing : TT-01 (Full Version)

All Forums >> [RC Cars, Buggies, Trucks, Tanks and more] >> RC Drifting

Message

magnat -> Opinions on Gearing : TT-01 (5/3/2008 1:18:54 AM)
I have just finished resurecting my TT-01.. I used it for a race in Silvercan class about a year ago and chewed the stock 61T Spur gear running some unheard of ratio just to stay competitive which resulted in the TT-01 being really quick but short term reliability.. So I have no 19T pinions or 61 Spur... I do have a 24T Pinion and a 58T Spur and will be using a Tamiya TZ to get her back up and drifting.. What is the Opinion on this combo???

TIGER76 -> RE: Opinions on Gearing : TT-01 (5/3/2008 11:43:51 AM)
Sounds good m8 i use 23/58 for drifting and it holds fine plenty of torque and nice long speed drifts on a 17turn. Im interested which combo u used on that 61 spur bro...

magnat -> RE: Opinions on Gearing : TT-01 (5/3/2008 2:21:38 PM)
Well... I pushed the Boundaries of the TT-01 to the Max and used a 25T on the 61 Spur and......... 1 screw in the motor mount done ULTRA tight.. used the paper Spacer method for the Mesh... So as you can see... whilst the TT-01 was Brilliantly fast...... it was.... unreliable... and would grip flip on corners and after each race would require a total strip down and re- spur.. Good thing about that cover over the TT-01 gears , quick to undo and replace the Spur before the next race.. I worked the Custom Gearing on Gearchart and needed a roll out of around 30.... and that combo was as close as I could get... All I can say is a Quick test run revealed some rear end problem... but.... Man with the TZ and the 24T/ 58 Gearing.... its Quick ! There is just something about the TT-01 that makes you just wanna drive it harder!

TIGER76 -> RE: Opinions on Gearing : TT-01 (5/3/2008 3:47:29 PM)
quote: There is just something about the TT-01 that makes you just wanna drive it harder! Lol tell me about it even tho they werent built for speed ive been running a 10x2 motor on a nolimit esc and it keeps up with my mates 5700 mm [:D] Every time it whizzes past the noise just makes me smile gotta love elecy hehe [8D] Havent tried 25/55 yet on the 10t got a feeling it would be pushing the gearing a bit much lol

magnat -> RE: Opinions on Gearing : TT-01 (5/4/2008 12:23:25 AM)
[image]http://i20.photobucket.com/albums/b231/nhoj62/gearratios.jpg[/image] Well I Did some rough Calcuelations.. I know my LRP V10 Spec 4 10x2T does 45.000rpm The diametre of my Foam Racing tyres is 62mm So using Gear chart and that combo you have there.. A Theoretical top speed of 91.96kph is possible... (this doesn't take into account Voltage, drag and friction)

Page: [1]

SITE MAP! : : FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.

0.1083984