New Aftershock

New Aftershock (Full Version)

All Forums >> [RC Cars, Buggies, Trucks, Tanks and more] >> RC Monster Trucks >> Losi Monster Trucks

Message

Airbus 9e -> New Aftershock (5/3/2008 4:31:30 AM)
I ordered my new Aftershock tonite. Should be here around the 12th-13th....

BAJABANDIT -> RE: New Aftershock (5/3/2008 4:54:31 AM)
They are freakin great man !!! ultimate suspension travel !!!!! It will wheely if tuned right! Heres mine all hopped up now... I definatly like the aluminum better than the stock A ARMS !!!! Enomous cooling head , GPM A ARMS , shocks, fuel cap, integy sway bar (anti roll kit), and vantage HX-5 tires and rims! plus wing mount kit and wing nice!!

BioRev -> RE: New Aftershock (5/3/2008 5:09:47 AM)
Best Rc i ever bought hands down. Yea i had LOTS of problems with it but down the line i learned alot on how to tune, rebuild, and repair it. As for Bandits aftshock nice ride. I spent most my money on a new spec 3, mufflers, intakes, headers and A-arms ( Meeting with a curb -_-) I don't care much for looks, the more black and chrome the better lol

BAJABANDIT -> RE: New Aftershock (5/3/2008 5:56:30 AM)
quote: ORIGINAL: BioRev Best Rc i ever bought hands down. Yea i had LOTS of problems with it but down the line i learned alot on how to tune, rebuild, and repair it. As for Bandits aftshock nice ride. I spent most my money on a new spec 3, mufflers, intakes, headers and A-arms ( Meeting with a curb -_-) I don't care much for looks, the more black and chrome the better lol I bought it for both looks and performance I think the aluminum is way better than the plastic for some parts... never full aluminum hop ups you have to mix it up in order for it to perform correctly you know!!!!! Gpm is holding up well and I think it takes landings alot better!

irockdude -> RE: New Aftershock (5/3/2008 6:00:59 PM)
Hey, tell me how it goes tuning and stuff then you get it. I'll be getting an aftershock in either the latter part of this month or the earlier part of next month. Cant wait! [:D]

BAJABANDIT -> RE: New Aftershock (5/3/2008 6:58:21 PM)
quote: ORIGINAL: irockdude Hey, tell me how it goes tuning and stuff then you get it. I'll be getting an aftershock in either the latter part of this month or the earlier part of next month. Cant wait! [:D] I got mine like 3 monthes ago and breakin was easy.... When it comes to tuning when it shifts into second you know your close! cause if mine was out of tune it wouldnt shift!!!

Airbus 9e -> RE: New Aftershock (5/3/2008 9:14:49 PM)
Which tuned pipe works best with an Aftershock?.....This will probably be my only upgrad other than the alloy engine brace

Sugafree -> RE: New Aftershock (5/3/2008 9:44:31 PM)
The LST2 HT Pipe it a Good Pipe, & Can be found with header on E-bay for around $30.....

Airbus 9e -> RE: New Aftershock (5/4/2008 1:53:37 PM)
Well that's kool....Next question. I have several unpainted Proline Dodge QuadCab bodies I bought for my T-Maxx. Are these a drop on to an Aftershock?....or will I need to use different mounts?...I'll also be installing my Futaba 3PM. Do the JR servos plug right into the Futaba reciever?..or do I need adaptor plugs?...

irockdude -> RE: New Aftershock (5/4/2008 4:45:18 PM)
You may need to make new mount holes for the body becuase tmaxxs are a little smaller than aftershocks. The servos should just plug right into the new reciver. Arnt all pistol grip recivers/transmitters the same plug wise?

Airbus 9e -> RE: New Aftershock (5/4/2008 5:06:37 PM)
Futaba and JR have slightly different plugs. I'm just wondering if the wires match up......My QuadCab bodies are brand new, so I'll have to mount them anyway....Thanks....

nitrojimbo -> RE: New Aftershock (5/5/2008 1:03:53 AM)
hi i have a question. i have an axial 28 in mine and i broke it in today and it did fine. then i decided to go and run it just normal on the ground(i did the heat cycle method on a block of wood). but it will only go like 2mph max at full throttle. the slipper is fine and it will grab great but i dont know wats wrong.[:'(]

Airbus 9e -> RE: New Aftershock (5/5/2008 2:24:10 AM)
Maybe you did'nt get the clutch installed correctly?....just a guess....

BioRev -> RE: New Aftershock (5/5/2008 12:52:19 PM)
Could be anything, Check your brakes to see if there engaged while driving or just freely roll the truck on the ground to if theres anything that makes it hard to. If still no then check your clutch or tranny for damage. Bigger motor puts alot more stress on parts and you could get the odd one to crap out. ...Just a suggestion :P

nitrojimbo -> RE: New Aftershock (5/5/2008 2:20:28 PM)
alright ill try that thnx for the help BioRev

Airbus 9e -> RE: New Aftershock (5/8/2008 1:16:30 AM)
Acording to FedEx, my Aftershock should be here when I get home from work tommorow....[:)]

Airbus 9e -> RE: New Aftershock (5/9/2008 2:26:40 AM)
....so much for that....They did'nt deliver it because i was'nt here to sign for it....[:@] I called my sister, and since she lives next door she's going to watch for the FedEx truck, so maybe I'll have it tommorow, and I can take it camping with me and start breaking it in...

BAJABANDIT -> RE: New Aftershock (5/9/2008 8:52:54 PM)
Dude go pick it up at fed ex!

Airbus 9e -> RE: New Aftershock (5/11/2008 6:27:55 PM)
well I went to the first FedEx warehouse....they told me it was at the other warehouse, so I drove over there....They closed for pickups about 45 minutes before I got there.....no problem....my sister signed for it friday morning....I took it camping with me and started breaking it in....got 1 tank thru it...then my glow starte died.....so I'll finish breaking it in today. I have about 3 glow starters, but I only had 1 with me....duh.... I still have to rig it with my good radio and NiMh pack, so I'll get to it later today....got lawn mowing to do.....poo

BAJABANDIT -> RE: New Aftershock (5/11/2008 9:02:40 PM)
pull your lawn mower with it its a push mower!!LOL

Airbus 9e -> RE: New Aftershock (5/13/2008 1:48:09 AM)
Well my brother inlaw came over and we got her running. Ran 3 tanks thru the motor before it got too dark. Did a couple gentle speed runs down the street just to see how it goes....We'll probably run it some more wenesday. He's already looking at new motors for his Savage....hehe

irockdude -> RE: New Aftershock (5/13/2008 1:49:59 AM)
Do ya have any pics or vids for us yet? [:D]

Airbus 9e -> RE: New Aftershock (5/13/2008 9:48:45 AM)
I have'nt yet. It just has the body that comes on all the Aftershocks on it right now, so it looks like any other out of the box truck...

jbb -> RE: New Aftershock (5/14/2008 12:34:02 AM)
airbus u might want to invest into the losi spinstart back plate and hex shaft stock pull/spin is horrible

Airbus 9e -> RE: New Aftershock (5/14/2008 1:35:43 AM)
hehe....I bought a SpinStart today....I'll get the backplate later...

Page: [1] 2 next > >>

SITE MAP! : : FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.

0.359375