Tamiya 1/16 M26 Pershing (Full Version)

All Forums >> [RC Cars, Buggies, Trucks, Tanks and more] >> RC Tanks >> War Room



Message

Jam21 -> Tamiya 1/16 M26 Pershing (5/3/2008 11:06:29 AM)

Hello

I just starting to build the tank but need some advice.

Do I need to spraying the whole lower hull with rubbers and tracks on or spraying/painting the lower hull before putting rubbers for the roadwheels and tracks on ?

Thank you

James



fv432 -> RE: Tamiya 1/16 M26 Pershing (5/3/2008 3:39:54 PM)

Hi james welcome to the forum [:D][:D]

first up you might get more advice posting in the main "tanks" forum but no probs doing it here just might be a bit on the slow side for responses[:D]

anyway personally i would spray/paint all the parts first while still on the "trees" then build and tidy up any bit's you can see after some of the sub building's been done

Rob



googlydoogly -> RE: Tamiya 1/16 M26 Pershing (5/3/2008 4:33:51 PM)

My advice is to remove the roadwheels off while painting the hull. The roadwheels are easy enough to re-install.

And be sure to paint the roadwheels first before putting on the rubbers. That way, you won't paint over the rubber and save yourself the hassle.



Page: [1]

Valid CSS!




SITE MAP!   : :   FORUM RULES

© 2001 - 2007 24-7 RC, LLC, all rights reserved.
0.0625