quote:

ORIGINAL: dashunde

How are they supposed to be charged?
How do you set the charger vs. what the pack capacity is?

Also, can the Hydrimax 4.8v Rx packs be charged with the standard Tx/Rx wall charger that comes with Futaba radios?
What about the 6.0v five cell Rx packs?

Always slow charge HYDRI at C/10 rate with peak offf for 14 hours...

I've got a Grenpow 3300mah 4.8v - four 4/3a cells.
Its a pack from a power tool, and I dont have the original charger.
How should I charge it?

If these are high current packs then after 5 cycles at slow C/10 your can go to 3 Amps with 4 to 6 mV peak detection

I have two main chargers that I use..
Dynamite Vision Peak Ultra
http://www.horizonhobby.com/Products/Default.aspx?ProdID=DYN4053

Hobbico Quick Field Charger MkII
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXCTZ5&P=V