|
leadtongue -> align blade grips for blade 400 (5/4/2008 6:25:30 PM)
|
Hi all! Was wondering if anyone knows if you can use align blade grips on the blade 400? Im using the align 325 pro woodies with a shaved down spacer i made from a pair of mangled stock blades.When i spool up i get a nice little wobble until head speed picks up. I have made sure blades are not too tight in grips or too loose either...also swash is level as can be ...shaft is new and true ...blades are balanced...and belt has proper tension. If you spool up and then stop and tighten up the blades so they are a bit more stiffer than they should be i dont get that wobble at startup as they are pretty much centered from the previous spool up. im guessing that the thinner pro woodies with the spacer are taking longer to center themselves at spool up...maybe spacer and blade surface friction is the problem? Anyway, if the align blade grips will fit i would just use them.. i dont like the stock blades...too many distortions on 3 pair purchased from lhs.
|
|
|
|
